That sealed the deal Lonnie. Why break a perfectly working thing LOL. I will leave it alone for now. The SIP/ATA gateways won’t work with the automation stuff I am doing.
Thank you all for continuing to support these analog TDM410 cards in all astlinux releases. That’s a big ask and you guys are just awesome And as for the full PCI, actually my mobo SuperMicro X11SPM-F does have 3 PCI slots on it. I run a 2nd generation Xeon 28 cores on it with 256G memory so I think is beefy enough :) https://www.supermicro.com/en/products/motherboard/X11SPM-F <https://www.supermicro.com/en/products/motherboard/X11SPM-F> Cheer and thanks again Ionel Chila > On Feb 5, 2022, at 11:57 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> > wrote: > > > >> On Feb 5, 2022, at 11:50 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> >> wrote: >> >>> >>> On Feb 5, 2022, at 11:09 AM, Ionel Chila via Astlinux-users >>> <astlinux-users@lists.sourceforge.net> wrote: >>> >>> I had this dedicated box with a Digium Wildcard TDM410 running forever, >>> thanks for all the hard work that is put into this great project. I run >>> few SIP trunks on this home PBX with VOIP providers from Europe, Asia and >>> US as I have family all over the world. I also use this for some >>> automation tasks, so the need for the FXO and FXS modules besides my home >>> line. >>> >>> I am in process of consolidating some of my small servers into a beefy >>> VmWare Esxi 7.0 server and I was wondering if migrating from this current >>> physical PBX to VmWare will work. The only part I am not sure in VmWare is >>> about TDM410. Will this TDM410 card still work properly even in the >>> virtual environment, of course after putting the card in passthrough mode. >>> Does anyone have a similar working setup? >>> >>> https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere >>> >>> Thanks >>> Ionel Chila >> >> The TDM410 is PCI not PCIe, so you have a "beefy VmWare Esxi 7.0 server" >> with PCI? >> >> While possible, (I have never done it) I would consider reserving one of >> your old boxes with PCI as a home-built SIP/ATA using AstLinux. >> >> Lonnie > > Update Ionel, > > No, using a DAHDI card will not work in a VM, as least with the standard > builds as the Digium hardware firmware is not installed for genx86_64-vm > builds. > > Building you own SIP/ATA gateway is the best option ... or leave a working > solution alone :-) > > Lonnie > > > > > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org.
_______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.