You’re correct PCI vs PCI-E :) my mistake I actually do have a spare Digium AEX410 PIC-E which should do the trick for that mobo. Will that work?
Cheers > On Feb 5, 2022, at 12:26 PM, Ionel Chila via Astlinux-users > <astlinux-users@lists.sourceforge.net> wrote: > > That sealed the deal Lonnie. Why break a perfectly working thing LOL. I will > leave it alone for now. The SIP/ATA gateways won’t work with the automation > stuff I am doing. > > Thank you all for continuing to support these analog TDM410 cards in all > astlinux releases. That’s a big ask and you guys are just awesome > > And as for the full PCI, actually my mobo SuperMicro X11SPM-F does have 3 PCI > slots on it. I run a 2nd generation Xeon 28 cores on it with 256G memory so I > think is beefy enough :) > > https://www.supermicro.com/en/products/motherboard/X11SPM-F > <https://www.supermicro.com/en/products/motherboard/X11SPM-F> > > > Cheer and thanks again > > Ionel Chila > > > > > >> On Feb 5, 2022, at 11:57 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com >> <mailto:li...@lonnie.abelbeck.com>> wrote: >> >> >> >>> On Feb 5, 2022, at 11:50 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com >>> <mailto:li...@lonnie.abelbeck.com>> wrote: >>> >>>> >>>> On Feb 5, 2022, at 11:09 AM, Ionel Chila via Astlinux-users >>>> <astlinux-users@lists.sourceforge.net >>>> <mailto:astlinux-users@lists.sourceforge.net>> wrote: >>>> >>>> I had this dedicated box with a Digium Wildcard TDM410 running forever, >>>> thanks for all the hard work that is put into this great project. I run >>>> few SIP trunks on this home PBX with VOIP providers from Europe, Asia and >>>> US as I have family all over the world. I also use this for some >>>> automation tasks, so the need for the FXO and FXS modules besides my home >>>> line. >>>> >>>> I am in process of consolidating some of my small servers into a beefy >>>> VmWare Esxi 7.0 server and I was wondering if migrating from this current >>>> physical PBX to VmWare will work. The only part I am not sure in VmWare >>>> is about TDM410. Will this TDM410 card still work properly even in the >>>> virtual environment, of course after putting the card in passthrough mode. >>>> Does anyone have a similar working setup? >>>> >>>> https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere >>>> <https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere> >>>> >>>> Thanks >>>> Ionel Chila >>> >>> The TDM410 is PCI not PCIe, so you have a "beefy VmWare Esxi 7.0 server" >>> with PCI? >>> >>> While possible, (I have never done it) I would consider reserving one of >>> your old boxes with PCI as a home-built SIP/ATA using AstLinux. >>> >>> Lonnie >> >> Update Ionel, >> >> No, using a DAHDI card will not work in a VM, as least with the standard >> builds as the Digium hardware firmware is not installed for genx86_64-vm >> builds. >> >> Building you own SIP/ATA gateway is the best option ... or leave a working >> solution alone :-) >> >> Lonnie >> >> >> >> >> _______________________________________________ >> Astlinux-users mailing list >> Astlinux-users@lists.sourceforge.net >> <mailto:Astlinux-users@lists.sourceforge.net> >> https://lists.sourceforge.net/lists/listinfo/astlinux-users >> >> Donations to support AstLinux are graciously accepted via PayPal to >> pay...@krisk.org. > > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org.
_______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
