On Sat, Dec 13, 2008 at 09:24:45AM -0500, Bob Copeland wrote:
> > Indeed gpio #3 controls the led.
> > I patched ath5k to use it, and led works now fine.
Sorry for the delay, can you test this patch?
From: Bob Copeland <m...@bobcopeland.com>
Date: Mon, 29 Dec 2008 23:14:24 -0500
Subject: [PATCH] ath5k: support LEDs on aspire one laptop
Add vendor ID for Foxconn and use it to set the ath5k LED gpio and
polarity for Acer branded laptops.
base.c:
Changes-licensed-under: 3-Clause-BSD
Reported-by: Maxim Levitsky <maximlevit...@gmail.com>
Signed-off-by: Bob Copeland <m...@bobcopeland.com>
---
drivers/net/wireless/ath5k/base.c | 7 +++++++
include/linux/pci_ids.h | 2 ++
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath5k/base.c
b/drivers/net/wireless/ath5k/base.c
index 40c0155..eb0675f 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2595,6 +2595,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
sc->led_pin = 1;
sc->led_on = 1; /* active high */
}
+ /* Pin 3 on Foxconn chips used in Aspire One A150 (0x105b:e008) */
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_FOXCONN) {
+ __set_bit(ATH_STAT_LEDSOFT, sc->status);
+ sc->led_pin = 3;
+ sc->led_on = 1; /* active high */
+ }
+
if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
goto out;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1800f1d..c1fb01c 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -834,6 +834,8 @@
#define PCI_DEVICE_ID_PROMISE_20276 0x5275
#define PCI_DEVICE_ID_PROMISE_20277 0x7275
+#define PCI_VENDOR_ID_FOXCONN 0x105b
+
#define PCI_VENDOR_ID_UMC 0x1060
#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
--
1.6.0.4
--
Bob Copeland %% www.bobcopeland.com
_______________________________________________
ath5k-devel mailing list
ath5k-devel@lists.ath5k.org
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
