On Mon, Jul 11, 2011 at 8:43 PM, Alex Hacker <[email protected]> wrote:
> On Mon, Jul 11, 2011 at 10:39:46PM +0800, Adrian Chadd wrote:
>> Have you just manually tried setting the relevant register using the
>> debug register read/write setup?
>>
> The TPC code is written aproximately 2 years ago in our propiertary
> AR5416/AR92xx driver
> which I currently adopt for AR9300. For AR5416/AR92xx chips it works fine.
I think this module has to be taken into acoount ar9003_eeprom.c ?
static int ar9003_hw_power_control_override(struct ath_hw *ah,
int frequency,
int *correction,
int *voltage, int *temperature)
>
>> Or when you set bit 6 in 0x993c, bit 6 doesn't stay set?
>
> Yes, exactly the following are happens:
> REG_WRITE(0X993c,0x7f);
> REG_READ(0X993c) -> 0x00367044;
> REG_WRITE(0X993c,<somethin>);
> REG_READ(0X993c) -> 0x0000007f;
>
>> adrian
> Best regards,
> Alex.
> _______________________________________________
> ath9k-devel mailing list
> [email protected]
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
--
shafi
_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
