On 28/02/2015 3:58 PM, Barry Quiel wrote:
On 2/25/2015 3:02 AM, Stephen Collier wrote:
On 25/02/2015 9:39 pm, Stephen Collier wrote:
On 25/02/2015 7:03 pm, Stephen Collier wrote:
On 25/02/2015 6:07 PM, Barry Quiel wrote:
On 2/24/2015 9:53 PM, Stephen Collier wrote:
On 25/02/2015 3:19 PM, Barry Quiel wrote:
On 2/24/2015 1:20 AM, Duncan Brown wrote:
On 24/02/2015 06:38, Stephen Collier wrote:
On 24/02/2015 4:08 pm, Barry Quiel wrote:
Stephen -
Thanks for the CentOS7 packages of .27. I have been looking
for them
for a while. A quick piece of feedback. It looks like
python-Mythtv
is missing a dependency. None of the metadata lookups would
work
until I added python-lxml. It didn't get added as a
dependency. This
could be my issue however. I used the CentOS minimal install
disk
and added from there. It's possible that python-lxml would get
installed from a "normal install"
Also one request: Any chance your next build of mythtv you
could
include hdmi-cec support? I installed libcec from your repo
and can
see the cec traffic with my pulse8 adapter. The key presses
just
aren't getting into mythfrontend. I did a mythfrontend
--version and
didn't see cec listed. My guess is that you didn't compile
in cec
support in myth, but I could be doing it wrong too.
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
Barry,
Thanks for the info. I'll add it to the build. I've tried a
couple of
times to get cec in the build (not too hard) but it ignores it at
configure time. If I know someone wants it I'll have a much
harder
look as I wanted to include it in the original builds.
Cheers
Stephen
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
I think it needs this patch to work with the version of libcec I
assume
you are using
https://code.mythtv.org/trac/ticket/11338
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
So no luck on the new packages. I'm not sure if its actually
getting
compiled in. I recall you mentioning you were have problems and it
was being ignored by configure. When I do a mythfrontend
--version I
would expect to see something like using_cec or using_libcec. I
don't
see that, but I could be wrong. I also don't see mythfrontend
linked
against libcec. But it's possible that they aren't linking against
the library and just reading raw from the /dev/tty. In that case
all
my assumptions would be incorrect.
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
Barry,
Sorry the new packages built before I made the changes. Automatic
builds
help me not have to keep kicking them off but they sometimes
build at
the wrong time. The 27.4-20 rpms are the ones you need. They should
build over the next couple of hours. Mock which is part of the build
system broke so I had to patch it before anything would build hence
the
delay.
Let me know if it works. It should be there soon.
Cheers
Stephen
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
Unfortunately it's still not working. But its not a myth problem
its a libcec problem. Basically the library can't find the /dev/tty
that the adapter is plugged into. So since it can't find it it
can't give it to mythfrontend. I don't see any method or config
file option to specify so that the library can find the /dev/tty
without the detection code.
The error is:
USB-CEC Adapter, so the path to the COM port has to be provided to
libCEC if this adapter is being used
Here is where I got libcec from ;)
libcec.x86_64 2.1.3-2.el7 @scrpms
libcec-devel.x86_64 2.1.3-2.el7 scrpms
If I can find the time maybe I will take a crack at trying to
compile libcec with detection code. I'd probably be playing a bit
of catch-up considering you have already packaged it, so have a
build script.
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
You can start with the src rpm and unpack
rpm2cpio libcec-2.1.3-2.el6.src.rpm | cpio -iv
libcec 2.4 is out so that is probably the place to start
I may have a look tomorrow if I have time.
Cheers and good luck
Stephen
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
my mistake libcec 2.2.0 is current
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
I've compiled 2.2 it should be at the repos soon - give it a try -
there appear to be no configuration options.
Good luck
Stephen
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
Nope that didn't do it. Still not compiled with auto-discover
support. Also noticed that the package is libcec-2.2.0 but the
libraries in the package are 2.0.2. I didn't manage to get it compile
with autodiscover support. The compile scripts don't deal well with
the all the changes around systemd in CentOS7. Good news is that
everything works in Myth with CEC support, so we are on the right
track. Just need to get a good package so I can just yum update to
stay current :)
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
The library was pulled from
https://github.com/Pulse-Eight/libcec/tree/libcec-2.2.0-repack and they
were 2.2.0 not sure where 2.0.2 came from.
Stephen
I
_______________________________________________
atrpms-users mailing list
atrpms-users@atrpms.net
http://lists.atrpms.net/mailman/listinfo/atrpms-users
