Hello guys,this version returns to roots and tries to define clearly the single solution I find teasing for multi-host and other complex tests.
Changes:
v2: Rewritten from scratch
v2: Added examples for the demonstration to avoid confusion
v2: Removed the mht format (which was there to demonstrate manual
execution)
v2: Added 2 solutions for multi-tests
v2: Described ways to support synchronization
v3: Renamed to multi-stream as it befits the purpose
v3: Improved introduction
v3: Workers are renamed to streams
v3: Added example which uses library, instead of new test
v3: Multi-test renamed to nested tests
v3: Added section regarding Job API RFC
v3: Better description of the Synchronization section
v3: Improved conclusion
v3: Removed the "Internal API" section (it was a transition between
no support and "nested test API", not a "real" solution)
v3: Using per-test granularity in nested tests (requires plugins
refactor from Job API, but allows greater flexibility)
v4: Removed "Standard python libraries" section (rejected)
v4: Removed "API backed by cmdline" (rejected)
v4: Simplified "Synchronization" section (only describes the
purpose)
v4: Refined all sections
v4: Improved the complex example and added comments
v4: Formulated the problem of multiple tasks in one stream
v4: Rejected the idea of bounding it inside MultiTest class
inherited from avocado.Test, using a library-only approach
v5: Avoid mapping ideas to multi-stream definition and clearly
define the idea I bear in my head for test building blocks
called nested tests.
Motivation
==========
Allow building complex tests out of existing tests producing a single
result depending on the complex test's requirements. Important thing is,
that the complex test might run those tests on the same, but also on a
different machine allowing simple development of multi-host tests. Note
that the existing tests should stay (mostly) unchanged and executable as
simple scenarios, or invoked by those complex tests.
Examples of what could be implemented using this feature:1. Adding background (stress) tasks to existing test producing real-world scenarios.
* cpu stress test + cpu hotplug test
* memory stress test + migration
* network+cpu+memory test on host, memory test on guest while
running migration
* running several migration tests (of the same and different type)
2. Multi-host tests implemented by splitting them into components and
leveraging them from the main test.
* multi-host migration * stressing a service from different machines Nested tests ============ Test ----A test is a receipt explaining prerequisites, steps to check how the unit under testing behaves and cleanup after successful or unsuccessful execution.
Test itself contains lots of neat features to simplify logging, results analysis and error handling evolved to simplify testing.
Test runner -----------Is responsible for driving the test(s) execution, which includes the standard test workflow (setUp/test/tearDown), handle plugin hooks (results/pre/post) as well as safe interruption.
Nested test -----------Is a test invoked by other test. It can either be executed in foreground (while the main test is waiting) or in background along with the main (and other background tests) test. It should follow the default test workflow (setUp/test/tearDown), it should keep all the neat test feature like logging and error handling and the results should also go into the main test's output, with the nested test's id as prefix. All the produced files of the nested test should be located in a new directory inside the main test results dir in order to be able to browse either overall results (main test + nested tests) or just the nested tests ones.
Resolver --------Resolver is an avocado component resolving a test reference into a list of test templates compound of the test name, params and other `avocado.Test.__init__` arguments.
Very simple example -------------------This example demonstrates how to use existing test (SimpleTest "/usr/bin/wget example.org") in order to create a complex scenario (download the main page from example.org from multiple computers almost concurrently), without any modifications of the `SimpleTest`.
import avocado
class WgetExample(avocado.Test):
def test(self):
# Initialize nested test runner
self.runner = avocado.NestedRunner(self)
# This is what one calls on "avocado run"
test_reference = "/usr/bin/wget example.org"
# This is the resolved list of templates
tests = avocado.resolver.resolve(test_reference)
# We could support list of results, but for simplicity
# allow only single test.
assert len(tests) == 1, ("Resolver produced multiple test "
"names: %s\n%s" % (test_reference,
tests)
test = tests[0]
for machine in self.params.get("machines"):
# Query a background job on the machine (local or
# remote) and return test id in order to query for
# the particular results or task interruption, ...
self.runner.run_bg(machine, test)
# Wait for all background tasks to finish, raise exception
# if any of them fails.
self.runner.wait(ignore_errors=False)
When nothing fails, this usage has no benefit over the simple logging
into a machine and firing up the command. The difference is, when
something does not work as expected. With nested test, one get a runner
exception if the machine is unreachable. And on test error he gets not
only overall log, but also the per-nested-test results simplifying the
error analysis. For 1, 2 or 3 machines, this makes no difference, but
imagine you want to run this from hundreds of machines. Try finding the
exception there.
Yes, you can implement the above without nested tests, but it requires a lot of boilerplate code to establish the connection (or raise an exception explaining why it was not possible and I'm not talking about "unable to establish connection", but granularity like "Invalid password", "Host is down", ...). Then you'd have to setup the output logging for that particular task, add the prefix, run the task (handling all possible exceptions) and interpret the results. All of this to get the same benefits very simple avocado test provides you.
Advanced example ----------------Imagine a very complex scenario, for example a cloud with several services. One could write a big-fat test tailored just for this scenario and keep adding sub-scenarios producing unreadable source code.
With nested tests one could split this task into tests: * Setup a fake network * Setup cloud service * Setup in-cloud service A/B/C/D/... * Test in-cloud service A/B/C/D/... * Stress network * Migrate nodesNew variants could be easily added, for example DDoS attack to some nodes, node hotplug/unplug, ... by invoking those existing tests and combining them into a complex test.
Additionally note that some of the tests, eg. the setup cloud service and setup in-cloud service are quite generic tests, what could be reused many times in different tests. Yes, one could write a library to do that, but in that library he'd have to handle all exceptions and provide nice logging, while not clutter the main output with unnecessary information.
Job results -----------Combine (multiple) test results into understandable format. There are several formats, the most generic one is file format:
.
├── id -- id of this job
├── job.log -- overall job log
└── test-results -- per-test-directories with test results
├── 1-passtest.py:PassTest.test -- first test's results
└── 2-failtest.py:FailTest.test -- second test's results
Additionally it contains other files and directories produced by avocado
plugins like json, xunit, html results, sysinfo gathering and info
regarding the replay feature.
Test results ------------In the end, every test produces results, which is what we're interested in. The results must clearly define the test status, should provide a record of what was executed and in case of failure, they should provide all the information in order to find the cause and understand the failure.
Standard tests does that by providing test log (debug, info, warning, error, critical), stdout, stderr, allowing to write to whiteboard and attach files in the results directory. Additionally due to structure of the test one knows what stage(s) of the test failed and pinpoint exact location of the failure (traceback in the log).
. ├── data -- place for other files produced by a test ├── debug.log -- debug, info, warn, error log ├── remote.log -- additional log regarding remote session ├── stderr -- standard error ├── stdout -- standard output ├── sysinfo -- provided by sysinfo plugin │ ├── post │ ├── pre │ └── profile └── whiteboard -- file for arbitrary test dataI'd like to extend this structure of either a directory "subtests", or convention for directories intended for nested test results `r"\d+-.*"`.
The `r"\d+-.*"` reflects the current test-id notation, which nested tests should also respect, replacing the serialized-id by in-test-serialized-id. That way we easily identify which of the nested tests was executed first (which does not necessarily mean it finished as first).
In the end nested tests should be assigned a directory inside the main test's results (or main test's results/subtests) and it should produce the data/debug.log/stdout/stderr/whiteboard in there as well as propagate the debug.log with a prefix to the main test's debug.log (as well as job.log).
└── 1-parallel_wget.py:WgetExample.test -- main test
├── data
├── debug.log -- contains main log + nested logs with prefixes
├── remote.log
├── stderr
├── stdout
├── sysinfo
│ ├── post
│ ├── pre
│ └── profile
├── whiteboard
├── 1-_usr_bin_wget\ example.org -- first nested test
│ ├── data
│ ├── debug.log -- contains only this nested test log
│ ├── remote.log
│ ├── stderr
│ ├── stdout
│ └── whiteboard
├── 2-_usr_bin_wget\ example.org -- second nested test
...
└── 3-_usr_bin_wget\ example.org -- third nested test
...
Note that nested tests can finish with any result and it's up to the
main test to evaluate that. This means that theoretically you could find
nested tests which states `FAIL` or `ERROR` in the end. That might be
confusing, so I think the `NestedRunner` should append last line to the
test's log saying `Expected FAILURE` to avoid confusion while looking at
results.
Note2: It might be impossible to pass messages in real-time across multiple machines, so I think at the end the main job.log should be copied to `raw_job.log` and the `job.log` should be reordered according to date-time of the messages. (alternatively we could only add a contrib script to do that).
Conclusion ==========I believe nested tests would help people covering very complex scenarios by splitting them into pieces similarly to Lego. It allows easier per-component development, consistent results which are easy to analyze as one can see both, the overall picture and the specific pieces and it allows fixing bugs in all tests by fixing the single piece (nested test).
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Avocado-devel mailing list Avocado-devel@redhat.com https://www.redhat.com/mailman/listinfo/avocado-devel
