Yes, you can't use OPIE-1.2's calibrating program to calibrate your touch screen. It keeps going in my case, too. Recopy the root file system? you don't have to do that, the file system will not be crashed when you reset it.
you can put this to your linuxrc :

export TSLIB_FBDEVICE=/dev/fb0
  export TSLIB_CONSOLEDEVICE=/dev/tty
  export TSLIB_TSDEVICE=/dev/input/event1
  export TSLIB_CALIBFILE=/etc/pointercal

and then put ts_calibrate to your linuxrc so it can be executed automatically, and after calibrating, it will rewrite /etc/pointercal with new calibrated data.



JeDi wrote:
On 1/4/06, Fisherss <[EMAIL PROTECTED]> wrote:
Yes, that's because of the /etc/pointercal  file, as my touch panel is
320x240 and yours are 640x480, so you need to re-adjust it with your
machine.
The way I am using is using OPIE-1 with tslib and ts_tools like ts_test
, ts_calibrate and so on. If you guys want it, I will upload, but not
now, it's 12:29 PM here, I have to go to bed later.

I tried deleting the /etc/pointercal file, and the opie touchscreen
calibration tool shows up, but it keeps going (you have to tap some
crosshairs, but the crosshairs just keep appearing).
Because I don't have a serial cable, I can't power off the device
properly, and some files get corrupted when I press the reset button.
I have to recopy the rootfs every time I try...
Also because I don't have a serial cable, I can't really use the
ts_tools (no interactive console), so I'm a bit lost here...

Anyone got a clue how I can calibrate the touchscreen? I also tried to
change the touchscreen kernel module (replacing all 320's with 640 and
all 240's with 480), but I don't know how to create the .ko file (not
created automatically, as there isn't a menu option for it yet).

So now I have a gui, but I can only click a couple of buttons :-)
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to