A hard reset is when you get the welcome screen, which means your
kernel is getting booted. That's normal, because your ram gets
overwritten (it is used as actual ram in linux, not as disk space as
in windows). I've seen problems with rom a02 (english) here at work
too. Actually, I've only got it to work with rom a04 and a05...

On 1/6/06, Javier Hernández <[EMAIL PROTECTED]> wrote:
> Hello,
>
> First, congratulations for the working port to everybody. Keep up the good
> work !
>
> I've tried the latest beta version, but I'm still stuck at booting. I've a
> x50v Axim
> with Spanish A02 WM2003SE Rom, that may be different from the english
> version
> because i can't boot using haret. However, I've tried the version 0.3.6 of
> haret, with
> the same results, except for one difference : it halts right after tapping
> on "run", but
> after the hard reset, WM doesn't get broken (with 0.3.2 seems to break the
> WN registry,
> showing the "welcome to WM" screen after reset).
>
> I'm thinking about upgrading to wm 5.0 (sigh), to see if I can boot whit it.
> Is it possible to boot from WM5?
> If not, I'll have to wait to another kind of booting (with bootloader or
> flashing the rom).
>
> Thank you for your help.
>
> Best regards,
> Javier.
>
>
> 2006/1/6, JeDi <[EMAIL PROTECTED]>:
> >
> > There are a few issues here. First there is an error that /dev can't
> > be mounted because it isn't in fstab. I think that's a devfs issue.
> > I'll look into that tomorrow (enable "auto mount at boot time" in the
> > kernel). So the problem is that there isn't a /dev/input directory
> > with the correct files in it.I tried creating a character device
> > /dev/input/ts0 c 13 128 (found that somehwere with google), and
> > setting the TS_DEVICE or what's it called to point to that, but I'm
> > still stuck at the calibration screen...
> >
> > Well, 3:30 am here, so time to go to bed. I hope Fisherss wakes up
> > soon and the answers are waiting for me when I wake up :-)
> >
> > Greetz,
> > JeDi
> >
> >
> > On 1/5/06, JeDi < [EMAIL PROTECTED]> wrote:
> > > Well, I created a configfile /etc/ts.conf, and put module_raw input in
> > > it. Now I get the calibration screen, but nothing happens when I press
> > > the screen. Are you sure the device is /dev/input/event1? Cause in the
> > > most examples its /dev/input/ts0. I'll try that now.
> > >
> > >
> > > On 1/5/06, JeDi < [EMAIL PROTECTED]> wrote:
> > > > On 1/4/06, Fisherss <[EMAIL PROTECTED]> wrote:
> > > > > Recopy the root file system? you don't have to do that, the file
> system
> > > > > will not be crashed when you reset it.
> > > >
> > > > Well, I clicked some programs and can't close them due to the
> > > > touchscreen not working properly, so they're the problem (it's only a
> > > > problem when it happens to qpe.conf, I'm getting the "first-time"
> > > > screen then, and can't go further, the system can't read the file). No
> > > > big problem though...
> > > >
> > > >
> > > > > you can put this to your linuxrc :
> > > > >
> > > > > export TSLIB_FBDEVICE=/dev/fb0
> > > > >    export TSLIB_CONSOLEDEVICE=/dev/tty
> > > > >    export TSLIB_TSDEVICE=/dev/input/event1
> > > > >    export TSLIB_CALIBFILE=/etc/pointercal
> > > > >
> > > > > and then put ts_calibrate to your linuxrc so it can be executed
> > > > > automatically, and after calibrating, it will rewrite
> /etc/pointercal
> > > > > with new calibrated data.
> > > >
> > > > I tried that, and first it failed cause you put /test in the path in
> > > > stead of /tests. Now it fails like this:
> > > >
> > > > Can't find the tslib config file.
> > > > ts_config: no such file or directory
> > > >
> > > > It finds the /dev/input/event1 though...
> > > >
> > > > Maybe you forgot some files in the rootfs? I'm close though :-)
> > > >
> > > > Thanks!
> > > >
> > > > Greetz,
> > > > JeDi
> > > >
> > >
> > --
> > _______________________________________________
> > Aximx50-port mailing list
> > [email protected]
> > https://www.handhelds.org/mailman/listinfo/aximx50-port
> >
>
>
> --
> _______________________________________________
> Aximx50-port mailing list
> [email protected]
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>
>
>
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to