Hurray! We have more things to look at :D

If i remember correctly the intel 2700g drivers where released on linux and the main chip is from PowerVR, so perhaps there's some GPL source somewhere, but if it's not... at least we'll be able to run it :p


I was looking at the source of the kernel tree that uploaded Michael Cutler and in the directory of our Axim X50(v) there are these files:

/kernel26/arch/arm/mach-pxa/aximx30 $ ls
CVS       aximx30.c       aximx30_core_minimal.c  aximx30_lcd_x50.c
Kconfig   aximx30_core.c  aximx30_lcd.c           x30_ts.c
Makefile  aximx30_core.h  aximx30_lcd.c.~1.1.~    x50_ts.c

Correct me if i'm wrong...
The x50_ts.c file is the touchscreen driver, and it seems that the file aximx30_lcd_x50.c is not used, and the file being used is aximx30_lcd.c. I also saw at the menuconfig that the resolution of the screen was put on 320x240. Michael, when you made the kernel image did you use the same kernel you uploaded? (the last one, because you had some kernels in different dates :p)

I'll try to play a little with the kernel, let's see if we get something :)

Philip Trickett (List) wrote:
It looks as if the driver for the graphics is excluded due to licensing
by Intel:


Attached is the patch used to build kernel-2.6.13.4-16.pepper against
the vendor's linux-2.6.13.4.tar.gz source tarball.

WARNING: This is a full patch including all custom-written Pepper Pad
drivers with the exception of the non-GPL proprietary Intel Marathon
graphics driver. Licensing restrictions prevent us from releasing this
code.

This source tree can be used to build drivers and modules but building
and installing a custom-built kernel may result in a non-functioning
Pepper Pad.




On Fri, 2006-02-10 at 12:24 +0100, JeDi wrote:

Hi, I just got this news. I don't have time to look at it now, but my
guess is that this will boost development significantly :-)

Greetz,
JeDi

---------- Forwarded message ----------
From: Cian O'Flynn <[EMAIL PROTECTED]>
Date: Feb 9, 2006 11:19 PM
Subject: Axim x50v Linux Post
To: JeDi <[EMAIL PROTECTED]>



Hey there,

I've been following the x50v linux mailing list for some time.
I had some trouble posting this to the list. If it's useful maybe you
could pass it on.

There have been a number of pepper pad source code releases over the
last few days. Since the pepper pad has similar hardware. Perhaps this
could help with the x50v port.

http://www.pepper.com/linux/

http://www.pepper.com/forums/forumdisplay.php?f=8

Anyway, I hope this helps.

Cian


--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to