I found this website randomly, it has a board that may be similar to what we are doing: http://www.compulab.co.il/x270/html/x270w-cm-datasheet.htm Maybe we can get some drivers from them... It does have a 2700G...
On 2/10/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote: > Hurray! We have more things to look at :D > > If i remember correctly the intel 2700g drivers where released on linux > and the main chip is from PowerVR, so perhaps there's some GPL source > somewhere, but if it's not... at least we'll be able to run it :p > > > I was looking at the source of the kernel tree that uploaded Michael > Cutler and in the directory of our Axim X50(v) there are these files: > > /kernel26/arch/arm/mach-pxa/aximx30 $ ls > CVS aximx30.c aximx30_core_minimal.c aximx30_lcd_x50.c > Kconfig aximx30_core.c aximx30_lcd.c x30_ts.c > Makefile aximx30_core.h aximx30_lcd.c.~1.1.~ x50_ts.c > > Correct me if i'm wrong... > The x50_ts.c file is the touchscreen driver, and it seems that the file > aximx30_lcd_x50.c is not used, and the file being used is aximx30_lcd.c. > I also saw at the menuconfig that the resolution of the screen was put > on 320x240. > Michael, when you made the kernel image did you use the same kernel you > uploaded? (the last one, because you had some kernels in different dates :p) > > I'll try to play a little with the kernel, let's see if we get something :) > > Philip Trickett (List) wrote: > > It looks as if the driver for the graphics is excluded due to licensing > > by Intel: > > > > > > Attached is the patch used to build kernel-2.6.13.4-16.pepper against > > the vendor's linux-2.6.13.4.tar.gz source tarball. > > > > WARNING: This is a full patch including all custom-written Pepper Pad > > drivers with the exception of the non-GPL proprietary Intel Marathon > > graphics driver. Licensing restrictions prevent us from releasing this > > code. > > > > This source tree can be used to build drivers and modules but building > > and installing a custom-built kernel may result in a non-functioning > > Pepper Pad. > > > > > > > > > > On Fri, 2006-02-10 at 12:24 +0100, JeDi wrote: > > > >>Hi, I just got this news. I don't have time to look at it now, but my > >>guess is that this will boost development significantly :-) > >> > >>Greetz, > >>JeDi > >> > >>---------- Forwarded message ---------- > >>From: Cian O'Flynn <[EMAIL PROTECTED]> > >>Date: Feb 9, 2006 11:19 PM > >>Subject: Axim x50v Linux Post > >>To: JeDi <[EMAIL PROTECTED]> > >> > >> > >> > >> Hey there, > >> > >> I've been following the x50v linux mailing list for some time. > >> I had some trouble posting this to the list. If it's useful maybe you > >>could pass it on. > >> > >> There have been a number of pepper pad source code releases over the > >>last few days. Since the pepper pad has similar hardware. Perhaps this > >>could help with the x50v port. > >> > >> http://www.pepper.com/linux/ > >> > >> http://www.pepper.com/forums/forumdisplay.php?f=8 > >> > >> Anyway, I hope this helps. > >> > >> Cian > > > > > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
