Hi,

The kernels I put up on my website were built from that source tree. However the only difference between the 20060117 source and the 20060118 zImage is the touchscreen hack JeDi recommended at the time (x1_new *=2 etc).

I havent had much chance to play recently, but I would seriously like to diff my kernel tree to the hh 2.6.11 tree and carry on maintaining the changes we make as patches we can apply to the latest hh kernel ( 2.6.15 i think )

Cheers,

--
Michael Cutler              . o O ( http://blog.lobstertechnology.com/ )
                                                         PGP: 0xC3ABA735


Angel Sánchez Morales wrote:
Hurray! We have more things to look at :D

If i remember correctly the intel 2700g drivers where released on linux and the main chip is from PowerVR, so perhaps there's some GPL source somewhere, but if it's not... at least we'll be able to run it :p


I was looking at the source of the kernel tree that uploaded Michael Cutler and in the directory of our Axim X50(v) there are these files:

/kernel26/arch/arm/mach-pxa/aximx30 $ ls
CVS       aximx30.c       aximx30_core_minimal.c  aximx30_lcd_x50.c
Kconfig   aximx30_core.c  aximx30_lcd.c           x30_ts.c
Makefile  aximx30_core.h  aximx30_lcd.c.~1.1.~    x50_ts.c

Correct me if i'm wrong...
The x50_ts.c file is the touchscreen driver, and it seems that the file aximx30_lcd_x50.c is not used, and the file being used is aximx30_lcd.c. I also saw at the menuconfig that the resolution of the screen was put on 320x240. Michael, when you made the kernel image did you use the same kernel you uploaded? (the last one, because you had some kernels in different dates :p)

I'll try to play a little with the kernel, let's see if we get something :)


--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to