Le mardi 23 janvier 2007 à 22:34 +0100, Patrick Steiner a écrit : > On Tuesday, 23. January 2007 20:11, you wrote: > > Hi Patrick, > > With the package i made yesterday, "pxafb" module was NOT automatically > > loaded at boot time. > > So, login via USB or serial cable was mandatory in order to manually > > "modprobe" frame buffer... > > > > Here is an updated version : > > http://jn.graux.free.fr/x51v-linux/x51v-linux.tar.gz > Thanks, i forgot my cradle in work :-( so i cant test it right now. but i´ll > do it tomorrow. > > do you know if the patches will be added to standard hh kernel? >
Yes Pierre just made a new folder in arch/arm/mach-pxa dedicated to X50/x51 machines and he should commit his modification soon. > or could you say me which you used und what hh kernel, so i could also add > this do OE. > 1)just checkout the latest head of linux kernel handheld : http://handhelds.org/moin/moin.cgi/x50vHowTo 2)apply the latest patches made by Pierre : http://jn.graux.free.fr/kernel_patches/ 3)make your kernel Bye. > > > > I also did some modification in initrd.gz to speed up the boot. > > Be careful, using NFS for root file system is no longer possible with > > this release. > > > > Patrick Steiner <patrick.steiner <at> a1.net> writes: > > > I have successfully build (not testet) a angstrom > > > (http://www.angstrom-distribution.org/) axim image via openembedded. > > > > > > now i´ll try to include all the patches to the hh kernel. if this > > > > works. > > > > > i´ll try to add the axim x51v to OE. > > > > > > meanwhile i have bootet my axim with linux from > > > http://jn.graux.free.fr/x51v-linux/ (version from yesterday). > > > > > > i get the usb-device on host, but i always get the following error: > > > > > > usb 2-2: new full speed USB device using uhci_hcd and address 16 > > > usb 2-2: configuration #1 chosen from 1 choice > > > usb0: register 'cdc_subset' at usb-0000:00:1d.1-2, Linux Device, > > > e2:d8:ec:8a:bd:48 > > > NETDEV WATCHDOG: usb0: transmit timed out > > > usb0: no IPv6 routers present > > > NETDEV WATCHDOG: usb0: transmit timed out > > > NETDEV WATCHDOG: usb0: transmit timed out > > > NETDEV WATCHDOG: usb0: transmit timed out > > > > If you got this, this probably means that Haret failed to load Linux... > > > > > and is also doesnt see anything on my axim. if i activate the mirror > > > mode i see a big-fat black-bar on my screen after a few seconds. > > > > Yep ... This means that Haret failed to load linux... > > > > > without mirror mode i see the 4 colored lines. this should be right > > > > or? > > > > > > Without mirror mode enabled, you MUST see five horizontal colored lines > > (blue, red, light blue, yellow, black). If so, this means that Linux was > > successfully loaded. > > > > > btw. i have got a german axim x51v with the latest german rom on it. > > > > > > patrick > > > > Before booting Linux, make sure that : > > - ONLY Haret is running (close all other applications) > > - rootfs image must be in the root of your SD card. > > > > To log-on using telnet over USB, wait for one minute after boot and > > unplug / plug Axim from cradle. Then, do "lsusb" to check that usb > > device has been detected by your HOST. > > > > Finally, "telnet 10.0.0.2" and login using "root" as > > login and "x50v-linux" as password... > > > > Do not hesitate to try several telnet ..... > > > > Bye > > bye > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
