Works perfectly on mine. Now to tackle the touchscreen? Opie isn't much good without an interface :-p

On Jan 23, 2007, at 2:20 PM, Jean-Nicolas GRAUx wrote:

Le mardi 23 janvier 2007 à 22:34 +0100, Patrick Steiner a écrit :
On Tuesday, 23. January 2007 20:11, you wrote:
Hi Patrick,
With the package i made yesterday, "pxafb" module was NOT automatically
loaded at boot time.
So, login via USB or serial cable was mandatory in order to manually
"modprobe" frame buffer...

Here is an updated version :
http://jn.graux.free.fr/x51v-linux/x51v-linux.tar.gz
Thanks, i forgot my cradle in work :-( so i cant test it right now. but i´ll
do it tomorrow.

do you know if the patches will be added to standard hh kernel?


Yes Pierre just made a new folder in arch/arm/mach-pxa dedicated to
X50/x51 machines and he should commit his modification soon.

or could you say me which you used und what hh kernel, so i could also add
this do OE.


1)just checkout the latest head of linux kernel handheld :
http://handhelds.org/moin/moin.cgi/x50vHowTo

2)apply the latest patches made by Pierre :
http://jn.graux.free.fr/kernel_patches/

3)make your kernel

Bye.

I also did some modification in initrd.gz to speed up the boot.
Be careful, using NFS for root file system is no longer possible with
this release.

Patrick Steiner <patrick.steiner <at> a1.net> writes:
I have successfully build (not testet) a angstrom
(http://www.angstrom-distribution.org/) axim image via openembedded.

now i´ll try to include all the patches to the hh kernel. if this

works.

i´ll try to add the axim x51v to OE.

meanwhile i have bootet my axim with linux from
http://jn.graux.free.fr/x51v-linux/ (version from yesterday).

i get the usb-device on host, but i always get the following error:

usb 2-2: new full speed USB device using uhci_hcd and address 16
usb 2-2: configuration #1 chosen from 1 choice
usb0: register 'cdc_subset' at usb-0000:00:1d.1-2, Linux Device,
e2:d8:ec:8a:bd:48
NETDEV WATCHDOG: usb0: transmit timed out
usb0: no IPv6 routers present
NETDEV WATCHDOG: usb0: transmit timed out
NETDEV WATCHDOG: usb0: transmit timed out
NETDEV WATCHDOG: usb0: transmit timed out

If you got this, this probably means that Haret failed to load Linux...

and is also doesnt see anything on my axim. if i activate the mirror
mode i see a big-fat black-bar on my screen after a few seconds.

Yep ... This means that Haret failed to load linux...

without mirror mode i see the 4 colored lines. this should be right

or?


Without mirror mode enabled, you MUST see five horizontal colored lines (blue, red, light blue, yellow, black). If so, this means that Linux was
successfully loaded.

btw. i have got a german axim x51v with the latest german rom on it.

 patrick

Before booting Linux, make sure that :
- ONLY Haret is running (close all other applications)
- rootfs image must be in the root of your SD card.

To log-on using telnet over USB, wait for one minute after boot and
unplug / plug Axim from cradle. Then, do "lsusb" to check that usb
device has been detected by your HOST.

Finally, "telnet 10.0.0.2" and login using "root" as
login and "x50v-linux" as password...

Do not hesitate to try several telnet .....

Bye

bye


--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to