Hi Paul,

Thanks for your feedback. I think I have some ideas.  I'll still have to see if 
I can find some time off my studying though. And I'll probably post back over 
the weekends.

Best regards,
Kelvin


----- Original Message -----
From: Paul Sokolovsky <[EMAIL PROTECTED]>
Date: Thursday, January 25, 2007 5:44 pm
Subject: Re: [Aximx50-port] Re: Touchscreen chip is not an ADS 7846

> Hello Kelvin,
> 
> Friday, January 26, 2007, 2:19:37 AM, you wrote:
> 
> > TexasInstument ADS7846 and TSC2046 use the same driver!!!
> 
>  Well, to be exact, these chips seem to be largely compatible. But
> devices with them seem to use different settings, at least. And
> unfortunately, we still don't have some machine-independent
> touchscreen driver which can be easily reused in different
> machines ;-((.
> 
>  Either way, you should take one of the existing drivers for this or
> that chip, and tweak it to work on aximx50. The amount of tweaks
> should be small (assuming you know exact config to use for TS chip).
> For ADS7846, I suggest h4000_ts. For TSC2046, all devices seem to just
> cut&paste hx4700's driver. Important note: please take *current*
> versions of the base driver. If there's older driver known to work for
> aximx50, that's good reference for chip config, but bad for actual
> code (as drivers on which it as based are likely changes since then).
> 
> > http://www.handhelds.org/hypermail/hx4700-port/20/2034.html
> 
> 
> 
> -- 
> Best regards,
> Paul                            mailto:[EMAIL PROTECTED]
> 
> 
-- 
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to