On Jan 28, 2007, at 11:54 AM, Pierre GAUFILLET wrote:

Hi,

the touchscreen is now working (probably for X50 and for sure for X51).
I will post a first patch soon.
I still have to define the coordinates transformation.
Wow, awesome. I'm really quite amazed at how fast this port is progressing. After the TS driver is finished, we should have a functioning linux distro yes? Though I assume CF and power management isn't working, which means there is still a lot to do before all features are done.

Paul : I see you committed a new 7846 device-independent driver. Should
I use this one from now ?

Could you please commit the following modification to
include/asm-arm/arch-pxa/memory.h ?

#ifdef CONFIG_DRAM_BASE
#define PHYS_OFFSET     (CONFIG_DRAM_BASE)
#else
#define PHYS_OFFSET     UL(0xa0000000)
#endif

For Axim X50/X51(v), the current kernel can not be used without a manual
modification...

Pierre

----- Original Message -----
From: Paul Sokolovsky <[EMAIL PROTECTED]>
Date: Thursday, January 25, 2007 5:44 pm
Subject: Re: [Aximx50-port] Re: Touchscreen chip is not an ADS 7846


Hello Kelvin,

Friday, January 26, 2007, 2:19:37 AM, you wrote:


TexasInstument ADS7846 and TSC2046 use the same driver!!!

 Well, to be exact, these chips seem to be largely compatible. But
devices with them seem to use different settings, at least. And
unfortunately, we still don't have some machine-independent
touchscreen driver which can be easily reused in different
machines ;-((.

 Either way, you should take one of the existing drivers for this or
that chip, and tweak it to work on aximx50. The amount of tweaks
should be small (assuming you know exact config to use for TS chip).
For ADS7846, I suggest h4000_ts. For TSC2046, all devices seem to just
cut&paste hx4700's driver. Important note: please take *current*
versions of the base driver. If there's older driver known to work for
aximx50, that's good reference for chip config, but bad for actual
code (as drivers on which it as based are likely changes since then).


http://www.handhelds.org/hypermail/hx4700-port/20/2034.html


--
Best regards,
Paul                            mailto:[EMAIL PROTECTED]




--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port

Reply via email to