Hi, the touchscreen is now working (probably for X50 and for sure for X51). I will post a first patch soon. I still have to define the coordinates transformation.
Paul : I see you committed a new 7846 device-independent driver. Should I use this one from now ? Could you please commit the following modification to include/asm-arm/arch-pxa/memory.h ? #ifdef CONFIG_DRAM_BASE #define PHYS_OFFSET (CONFIG_DRAM_BASE) #else #define PHYS_OFFSET UL(0xa0000000) #endif For Axim X50/X51(v), the current kernel can not be used without a manual modification... Pierre > > ----- Original Message ----- > From: Paul Sokolovsky <[EMAIL PROTECTED]> > Date: Thursday, January 25, 2007 5:44 pm > Subject: Re: [Aximx50-port] Re: Touchscreen chip is not an ADS 7846 > > >> Hello Kelvin, >> >> Friday, January 26, 2007, 2:19:37 AM, you wrote: >> >> >>> TexasInstument ADS7846 and TSC2046 use the same driver!!! >>> >> Well, to be exact, these chips seem to be largely compatible. But >> devices with them seem to use different settings, at least. And >> unfortunately, we still don't have some machine-independent >> touchscreen driver which can be easily reused in different >> machines ;-((. >> >> Either way, you should take one of the existing drivers for this or >> that chip, and tweak it to work on aximx50. The amount of tweaks >> should be small (assuming you know exact config to use for TS chip). >> For ADS7846, I suggest h4000_ts. For TSC2046, all devices seem to just >> cut&paste hx4700's driver. Important note: please take *current* >> versions of the base driver. If there's older driver known to work for >> aximx50, that's good reference for chip config, but bad for actual >> code (as drivers on which it as based are likely changes since then). >> >> >>> http://www.handhelds.org/hypermail/hx4700-port/20/2034.html >>> >> >> -- >> Best regards, >> Paul mailto:[EMAIL PROTECTED] >> >> >> -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
