Hi, Did you get my last update?
Thanks Yaron -----Original Message----- From: Adrian Dick [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 28, 2006 3:37 PM To: Apache AXIS C User List Subject: RE: Unhandled exception at 0x7c901230 : User breakpoint Hi, Can you try turning on start up trace. Set the following environment variable to point to the log file you wish to create: AXISCPP_STARTUP_TRACE eg: AXISCPP_STARTUP_TRACE=c:\test\starttrace.txt Regards, Adrian _______________________________________ Adrian Dick ([EMAIL PROTECTED]) "Yaron Cohen" <[EMAIL PROTECTED]> wrote on 28/02/2006 11:47:15: > Hi, > > Now my conf file looks like this: > > # The comment character is '#' > #Available directives are as follows > #(Some of these directives may not be implemented yet) > # > #WSDDFilePath:The path to the server wsdd > #LogPath:The path to the axis log > #ClientLogPath:The path to the axis client log > #ClientWSDDFilePath:The path to the client wsdd > #Transport_http:The HTTP transport library > #Transport_smtp:The SMTP transport library > #XMLParser:The xml parser library > #NodeName:Node name > #ListenPort:Listening port > #Channel_HTTP:The HTTP transport channel library > #Channel_HTTP_SSL:The HTTP transport secure channel library > > #LogPath:Axis\logs\AxisLog.txt > #WSDDFilePath:Axis\conf\server.wsdd > > Transport_http:C:\test\HTTPTransport.dll > Channel_HTTP:C:\test\HTTPChannel.dll > XMLParser:C:\test\AxisXMLParserXerces.dll > ClientLogPath:C:\test\log.txt > > All the dlls(HTTPTransport.dll, HTTPChannel.dll, > AxisXMLParserXerces.dll) are at c:\test, so it would not be any spaces > in the folder path. In addition, I tried to set the path to > D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\bin, but it still > does not work. > > I am getting the same problem. > > I am still not getting any logs. > > Any suggestions? > > Thanks > Yaron > > -----Original Message----- > From: Adrian Dick [mailto:[EMAIL PROTECTED] > Sent: Monday, February 27, 2006 1:08 PM > To: Apache AXIS C User List > Subject: RE: Unhandled exception at 0x7c901230 : User breakpoint > > Hi, > > > ok, for the logs. > LogPath is used by Axis c++ server, for client you need to use > ClientLogPath > > The paths you're specifying for the various Axis C++ DLLs look a little > suspicious to me, are they really located within your samples structure? > or should your paths look more like: > > Transport_http:D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\bin\HT > TPTransport.dll > > Asides from that you look to have the right settings. So it could be a > path issue. Your path needs to include: Axis C++ libraries ( <axis > install>\bin ) and the Xerces-c libraries ( <xerces-c install>\bin ) > (must > be v2.2.0 if using binary package). > > Adrian > _______________________________________ > Adrian Dick ([EMAIL PROTECTED]) > WebSphere MQ and ESB Development > IBM United Kingdom Ltd. > Tel: +44-(0)-1962-819212 > Notes: Adrian Dick/UK/[EMAIL PROTECTED] > > "Yaron Cohen" <[EMAIL PROTECTED]> wrote on 27/02/2006 08:57:14: > > > Hi, > > > > Thanks for the quick answer. > > > > I am working with the latest version (I think) since I just download > it > > (axis-c-1-5-win32). > > > > In addition, the first error that I got was that it can not find the > > conf file. > > > > After I solved this problem, I did what ever you said in the > > http://ws.apache.org/axis/cpp/install-guide.html#Installing_Client. > > Nevertheless, I think that I am not configuring it right. > > > > Here is my conf file content: > > > > # The comment character is '#' > > #Available directives are as follows > > #(Some of these directives may not be implemented yet) > > # > > #WSDDFilePath:The path to the server wsdd > > #LogPath:The path to the axis log > > #ClientLogPath:The path to the axis client log > > #ClientWSDDFilePath:The path to the client wsdd > > #Transport_http:The HTTP transport library > > #Transport_smtp:The SMTP transport library > > #XMLParser:The xml parser library > > #NodeName:Node name > > #ListenPort:Listening port > > #Channel_HTTP:The HTTP transport channel library > > #Channel_HTTP_SSL:The HTTP transport secure channel library > > > > #LogPath:Axis\logs\AxisLog.txt > > #WSDDFilePath:Axis\conf\server.wsdd > > > Transport_http:D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\sample > > s\client\WebServiceClientTest3\HTTPTransport.dll > > > Channel_HTTP:D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\samples\ > > client\WebServiceClientTest3\HTTPChannel.dll > > > XMLParser:D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\samples\cli > > ent\WebServiceClientTest3\AxisXMLParserXerces.dll > > #ClientWSDDFilePath:C:\Documents and > > > Settings\yaronco\Desktop\axis-c-win32-current-bin\axis-c-1-5-win32\sampl > > es\client\WebServiceClientTest3\deploy\conf\client.wsdd > > > LogPath:D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\samples\clien > > t\WebServiceClientTest3\deploy\log\log.txt > > > > I am not getting any logs in the > > > "D:\mySms\axis-c-win32-current-bin\axis-c-1-5-win32\samples\client\WebSe > > rviceClientTest3\deploy\log" configured directory. > > > > Please help me, it looks like I am lost. > > > > > > > > -----Original Message----- > > From: Adrian Dick [mailto:[EMAIL PROTECTED] > > Sent: Monday, February 27, 2006 10:44 AM > > To: Apache AXIS C User List > > Subject: Re: Unhandled exception at 0x7c901230 : User breakpoint > > > > Hi, > > > > Which version of Axis C++ are you using, and are you following the > > bundled > > instructions or latest versions available on > > http://ws.apache.org/axis/cpp/documentation.html ? > > > > It sounds like the problem you're seeing is caused by the Xerces-C > > libraries not being available on the system library path at runtime. > > Check > > the latest install/config instructions here: > > http://ws.apache.org/axis/cpp/install-guide.html#Installing_Client > > > > Adrian > > _______________________________________ > > Adrian Dick ([EMAIL PROTECTED]) > > > > > > "Yaron Cohen" <[EMAIL PROTECTED]> wrote on 27/02/2006 07:25:15: > > > > > Hi, > > > > > > I have the same problem as described at: http://www.nabble. > > > > > > com/Using-generated-CPP-files-in-visual-studio-2003-t841990.html#a218167 > > 1. > > > > > Can you please explain to me: > > > > > > How should I configure the conf file? It looks like what ever I do > > > in order to configure it, I get the same error. > > > > > > Please note that I did what ever you explain under "Client > > > Installation and Configuration" and it does not work. > > > > > > Thanks > > > Yaron > > > > > > > > > Yaron Cohen > > > VoIP Integrations Software Engineer EIS, R&D > > > NICE Systems. Israel > > > > > > (T) +972 (9) 7752338 > > > (M) +972 (54) 5442488 > > > (F) +972 (9) 7753600 > > > > > > [EMAIL PROTECTED] > > > www.nice.com > > > > > > ------------------------------- > > > NICE - Insight from Interactions > > > > > > >
