W dniu 19 lipca 2011 00:59 użytkownik Michael Büsch <[email protected]> napisał: > On Tue, 19 Jul 2011 00:39:10 +0200 > Rafał Miłecki <[email protected]> wrote: > >> W dniu 18 lipca 2011 22:41 użytkownik Michael Büsch <[email protected]> napisał: >> > On Mon, 18 Jul 2011 22:14:50 +0200 >> > Rafał Miłecki <[email protected]> wrote: >> > >> >> When using DMA on one of my BCM4321s and BCM43224 or BCM43225 I don't >> >> get a single RX IRQ. >> >> >> >> Doing scanning requests sends TX packets to the hardware, and the >> >> ucode generates IRQs for confirming transmitted packets. RX does not >> >> seem to work however. I expected to see "native" beacons, or response >> >> to the scanning request. >> >> >> >> Do you have idea what may be wrong, where should I look at? >> > >> > Is wl still using the same dma engine for >> > RX as older versions did? (what was it? the first?) >> >> Yes. That's what wl does: >> >> 1) Disabling DMA engines (RX part) >> write32 0xfaafc220 <- 0x00000000 >> read32 0xfaafc230 -> 0x00000000 >> >> 2) Enabling DMA engines (RX part) >> read32 0xfaafc220 -> 0x00000040 >> write32 0xfaafc220 <- 0x0000084d CTL: [38 << 1 (OFFSET) | 0x1 (EN) | >> 0x800 (PARITY)] >> write32 0xfaafc228 <- 0x18948000 LO: [lo addr & ~routing_bits] >> write32 0xfaafc22c <- 0x80000000 HI: [routing & ~ROUT_MASK | routing] >> >> (improved) b43 does: >> >> write32 0xfaafc220 <- 0x0000084d CTL >> write32 0xfaafc228 <- 0x17b70000 LO >> write32 0xfaafc22c <- 0x80000000 HI >> write32 0xfaafc224 <- 0x00000400 STOP IDX > > What about the DMA interrupt masks?
Well, in b43 we ask for all IRQs: b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); write32 0xfaafc128 <- 0xffffffff wl also does: write32 0xfaafc128 <- 0xffffffff (All the dumps I provide in this thread come from BCM43224) -- Rafał _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
