Kern, I did a quick perusal of the developer's document but found no answer as to how the console program connects to the director. I am attempting to figure out a way to basically make a clone for the console by way of php scripts. I'll continue to read, but if you have any quick notes or links that can point me in the right direction it would be most appreciated. The only area that I could find that might have contained the information is: http://www.bacula.org/developers/Impleme_Bacula_GUI_Interfa.html which does not contain useful information for my project. Mostly what I found in there is helpful if I was writing lower level code, but I'm looking more into just accessing it from a web interface for my admins. Again, I'll keep digging, maybe I haven't dug deep enough
Thanks again, Sherwood ->-----Original Message----- ->From: Kern Sibbald [mailto:[EMAIL PROTECTED] ->Sent: Tuesday, July 12, 2005 8:57 AM ->To: Rushowr ->Cc: [EMAIL PROTECTED] ->Subject: Re: [Bacula-users] Web interface? -> ->On Tuesday 12 July 2005 13:54, Rushowr wrote: ->> Last question concerning this, what protocol does the bconsole ->> interface use to connect to the director? If possible I'd like to ->> being development of my own interface (I would release it under the ->> gpl on sourceforge). Does it use telnet over the director port? -> ->Please see the developer's document. There are links to it ->from www.bacula.org ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
