I cannot comment on your problems in your first email because it seems to be hardware related. See below for some comments.
On Wednesday 19 April 2006 03:57, pedro moreno wrote: > Hi people, i have this. > > HP Surestore Ultrium 230 > Adaptec 29160 Chip PCI > FreeBSD 5.4-p10 > Bacula 1.38.5 Server > > The SCSI card has one external connector LVD, the Surestore has the same > Input them my cable is one HP C5741A wich support: > > AutoBackup PC 100 > AutoBackup PC 25 > SCSI Cable > StorageWorks DAT40e > StorageWorks Ultrium 215 tape drive for ProLiant > StorageWorks Ultrium 460 tape drive > SureStore DAT40e > SureStore DAT40x6e > SureStore DLT 1e > SureStore DLT VS80e > SureStore DLT80e > SureStore Ultrium 215e > SureStore Ultrium 230e > > I setup my bacula-sd.conf like this: > > Device { > Name = Surestore-230 > Media Type = LTO-1 > Archive Device = /dev/nsa0 > AutomaticMount = yes; > AlwaysOpen = yes > Offline On Unmount = no > Hardware End of Medium = no > BSF at EOM = yes > Maximum Spool Size = 5G > Spool Directory = /opt/backup/spool > Backward Space Record = no > Fast Forward Space File = no > TWO EOF = yes > } Judging by the error messages you got below during the btape "test" command, I would try the test again with two changes: BSF at EOM = no TWO EOF = no If that fails, try the two recommended configurations given in the manual. One is probably identical to the above, but it would be worth checking. > > Them i start my test with btape wich say that everything was nice and > candy, them i use the fill command and start the problems: > > Do you want to run the simplified test (s) with one tape > or the complete multiple tape (m) test: (s/m) s > Simple test (single tape) selected. > Wrote Volume label for volume "TestVolume1". > Wrote Start of Session label. > 08:22:46 Begin writing Bacula records to tape ... > Wrote blk_block=5000, dev_blk_num=986 VolBytes=63,608,832 rate=1551.4 KB/s > Wrote blk_block=10000, dev_blk_num=5986 VolBytes=386,168,808 > rate=1331.6KB/s Wrote blk_block=15000, dev_blk_num=10986 > VolBytes=708,728,752 rate=1342.3KB/s 18-Apr 08:36 btape: End of Volume > "TestVolume1" at 1:14686 on device "Surestore-230" (/dev/nsa0). Write of > 64512 bytes got 0. > 18-Apr 08:40 btape: btape Error: Error writing final EOF to tape. This > Volume may not be readable. > dev.c:1536 ioctl MTWEOF error on "Surestore-230" (/dev/nsa0). > ERR=Input/output error. > btape: btape.c:2301 Last block at: 1:14685 this_dev_block_num=14686 > btape: btape.c:2335 End of tape 1:14686. VolumeCapacity=947,423,112. Write > rate = 911.0 KB/s > Done writing ... > Wrote state file last_block_num1=14685 last_block_num2=0 > > 08:40:06 Done filling tape at 1:14686. Now beginning re-read of tape ... > Rewinding. > Reading the first 10000 records from 0:0. > 18-Apr 08:46 btape: End of Volume at file 1 on device "Surestore-230" > (/dev/nsa0), Volume "TestVolume1" > btape: btape.c:2732 End of Volume "TestVolume1" > Read block=18700, VolBytes=64,448 rate=0.2 KB/s > 18-Apr 08:46 btape: btape Fatal error: acquire.c:143 Num_writers=1 not > zero. Job 0 canceled. > btape: btape.c:2759 Cannot open Dev="Surestore-230" (/dev/nsa0), > Vol=TestVolume2 > 18-Apr 08:46 btape: End of all volumes. > Reposition from 0:0 to 1:14685 > 18-Apr 08:46 btape: Fatal Error at dev.c:1441 because: > dev.c:1440 Bad call to reposition_dev. Device not open > Reposition error. ERR=dev.c:1440 Bad call to reposition_dev. Device not > open > > Here i use my Cleaner. > > Them i use another new tape and start the test following the bacula tape > test process, and again the fill test fail: > > Do you want to run the simplified test (s) with one tape > or the complete multiple tape (m) test: (s/m) s > Simple test (single tape) selected. > Wrote Volume label for volume "TestVolume1". > Wrote Start of Session label. > 09:53:31 Begin writing Bacula records to tape ... > Wrote blk_block=5000, dev_blk_num=986 VolBytes=63,608,832 rate=1631.0 KB/s > Wrote blk_block=10000, dev_blk_num=5986 VolBytes=386,168,808 > rate=1440.9KB/s Wrote blk_block=15000, dev_blk_num=10986 > VolBytes=708,728,752 rate=1403.4KB/s 18-Apr 10:06 btape: End of Volume > "TestVolume1" at 1:15212 on device "Surestore-230" (/dev/nsa0). Write of > 64512 bytes got 0. > 18-Apr 10:21 btape: btape Error: Error writing final EOF to tape. This > Volume may not be readable. > dev.c:1536 ioctl MTWEOF error on "Surestore-230" (/dev/nsa0). > ERR=Input/output error. > btape: btape.c:2301 Last block at: 1:15211 this_dev_block_num=15212 > btape: btape.c:2335 End of tape 1:15212. VolumeCapacity=981,356,424. Write > rate = 576.3 KB/s > Done writing ... > Wrote state file last_block_num1=15211 last_block_num2=0 > > 10:21:54 Done filling tape at 1:15212. Now beginning re-read of tape ... > Rewinding. > Reading the first 10000 records from 0:0. > 18-Apr 10:26 btape: End of Volume at file 1 on device "Surestore-230" > (/dev/nsa0), Volume "TestVolume1" > btape: btape.c:2732 End of Volume "TestVolume1" > Read block=19226, VolBytes=64,448 rate=0.2 KB/s > 18-Apr 10:26 btape: btape Fatal error: acquire.c:143 Num_writers=1 not > zero. Job 0 canceled. > btape: btape.c:2759 Cannot open Dev="Surestore-230" (/dev/nsa0), > Vol=TestVolume2 > 18-Apr 10:26 btape: End of all volumes. > Reposition from 0:0 to 1:15211 > 18-Apr 10:26 btape: Fatal Error at dev.c:1441 because: > dev.c:1440 Bad call to reposition_dev. Device not open > Reposition error. ERR=dev.c:1440 Bad call to reposition_dev. Device not > open > > > Again my Cleaner. The problem right now is that my Tape Device dosent > accept any tape, if i try to insert some tape: > 1;Didnt insert automatically the tape. > 2;If i push the tape, dosent do nothing, i need to press the Eject button > to get the tape back, feels like the sensor is damage or dont want to work. > 3;I reset the device but still any answer. > > I need to get this device again online, someone knows a way to fix this > problem...? I think i need to download the Tools software that HP give to > you to check what is wrong with my device. > > Any tips will be apreciated. Thanks all for your time :-(!!! -- Best regards, Kern ("> /\ V_V ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users