Hi people, i have this.
HP Surestore Ultrium 230
Adaptec 29160 Chip PCI
FreeBSD 5.4-p10
Bacula 1.38.5 Server
The SCSI card has one external connector LVD, the Surestore has the same Input them my cable is one HP
C5741A wich support:
AutoBackup PC 100
AutoBackup PC 25
SCSI Cable
StorageWorks DAT40e
StorageWorks Ultrium 215 tape drive for ProLiant
StorageWorks Ultrium 460 tape drive
SureStore DAT40e
SureStore DAT40x6e
SureStore DLT 1e
SureStore DLT VS80e
SureStore DLT80e
SureStore Ultrium 215e
SureStore Ultrium 230e
I setup my bacula-sd.conf like this:
Device {
Name = Surestore-230
Media Type = LTO-1
Archive Device = /dev/nsa0
AutomaticMount = yes;
AlwaysOpen = yes
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Maximum Spool Size = 5G
Spool Directory = /opt/backup/spool
Backward Space Record = no
Fast Forward Space File = no
TWO EOF = yes
}
Them i start my test with btape wich say that everything was nice and candy, them i use the fill command and start the problems:
Do you want to run the simplified test (s) with one tape
or the complete multiple tape (m) test: (s/m) s
Simple test (single tape) selected.
Wrote Volume label for volume "TestVolume1".
Wrote Start of Session label.
08:22:46 Begin writing Bacula records to tape ...
Wrote blk_block=5000, dev_blk_num=986 VolBytes=63,608,832 rate=1551.4 KB/s
Wrote blk_block=10000, dev_blk_num=5986 VolBytes=386,168,808 rate=1331.6 KB/s
Wrote blk_block=15000, dev_blk_num=10986 VolBytes=708,728,752 rate=
1342.3 KB/s
18-Apr 08:36 btape: End of Volume "TestVolume1" at 1:14686 on device "Surestore-230" (/dev/nsa0). Write of 64512 bytes got 0.
18-Apr 08:40 btape: btape Error: Error writing final EOF to tape. This Volume may not be readable.
dev.c:1536 ioctl MTWEOF error on "Surestore-230" (/dev/nsa0). ERR=Input/output error.
btape: btape.c:2301 Last block at: 1:14685 this_dev_block_num=14686
btape: btape.c:2335 End of tape 1:14686. VolumeCapacity=947,423,112. Write rate =
911.0 KB/s
Done writing ...
Wrote state file last_block_num1=14685 last_block_num2=0
08:40:06 Done filling tape at 1:14686. Now beginning re-read of tape ...
Rewinding.
Reading the first 10000 records from 0:0.
18-Apr 08:46 btape: End of Volume at file 1 on device "Surestore-230" (/dev/nsa0), Volume "TestVolume1"
btape: btape.c:2732 End of Volume "TestVolume1"
Read block=18700, VolBytes=64,448 rate=
0.2 KB/s
18-Apr 08:46 btape: btape Fatal error: acquire.c:143 Num_writers=1 not zero. Job 0 canceled.
btape: btape.c:2759 Cannot open Dev="Surestore-230" (/dev/nsa0), Vol=TestVolume2
18-Apr 08:46 btape: End of all volumes.
Reposition from 0:0 to 1:14685
18-Apr 08:46 btape: Fatal Error at dev.c:1441 because:
dev.c:1440 Bad call to reposition_dev. Device not open
Reposition error. ERR=dev.c:1440 Bad call to reposition_dev. Device not open
Here i use my Cleaner.
Them i use another new tape and start the test following the bacula tape test process, and again the fill test fail:
Do you want to run the simplified test (s) with one tape
or the complete multiple tape (m) test: (s/m) s
Simple test (single tape) selected.
Wrote Volume label for volume "TestVolume1".
Wrote Start of Session label.
09:53:31 Begin writing Bacula records to tape ...
Wrote blk_block=5000, dev_blk_num=986 VolBytes=63,608,832 rate=1631.0 KB/s
Wrote blk_block=10000, dev_blk_num=5986 VolBytes=386,168,808 rate=1440.9 KB/s
Wrote blk_block=15000, dev_blk_num=10986 VolBytes=708,728,752 rate=
1403.4 KB/s
18-Apr 10:06 btape: End of Volume "TestVolume1" at 1:15212 on device "Surestore-230" (/dev/nsa0). Write of 64512 bytes got 0.
18-Apr 10:21 btape: btape Error: Error writing final EOF to tape. This Volume may not be readable.
dev.c:1536 ioctl MTWEOF error on "Surestore-230" (/dev/nsa0). ERR=Input/output error.
btape: btape.c:2301 Last block at: 1:15211 this_dev_block_num=15212
btape: btape.c:2335 End of tape 1:15212. VolumeCapacity=981,356,424. Write rate =
576.3 KB/s
Done writing ...
Wrote state file last_block_num1=15211 last_block_num2=0
10:21:54 Done filling tape at 1:15212. Now beginning re-read of tape ...
Rewinding.
Reading the first 10000 records from 0:0.
18-Apr 10:26 btape: End of Volume at file 1 on device "Surestore-230" (/dev/nsa0), Volume "TestVolume1"
btape: btape.c:2732 End of Volume "TestVolume1"
Read block=19226, VolBytes=64,448 rate=
0.2 KB/s
18-Apr 10:26 btape: btape Fatal error: acquire.c:143 Num_writers=1 not zero. Job 0 canceled.
btape: btape.c:2759 Cannot open Dev="Surestore-230" (/dev/nsa0), Vol=TestVolume2
18-Apr 10:26 btape: End of all volumes.
Reposition from 0:0 to 1:15211
18-Apr 10:26 btape: Fatal Error at dev.c:1441 because:
dev.c:1440 Bad call to reposition_dev. Device not open
Reposition error. ERR=dev.c:1440 Bad call to reposition_dev. Device not open
Again my Cleaner. The problem right now is that my Tape Device dosent accept any tape, if i try to insert some tape:
1;Didnt insert automatically the tape.
2;If i push the tape, dosent do nothing, i need to press the Eject button to get the tape back, feels like the sensor is damage or dont want to work.
3;I reset the device but still any answer.
I need to get this device again online, someone knows a way to fix this problem...? I think i need to download the Tools software that HP give to you to check what is wrong with my device.
Any tips will be apreciated. Thanks all for your time :-(!!!
- [Bacula-users] Problem with my Surestore 230, is not respondi... pedro moreno