On Nov 23, 2006, at 8:11 AM, Alan Brown wrote:
> On Thu, 23 Nov 2006, Kern Sibbald wrote: > > >> Most likely either the Dir or SD has crashed during a backup, or >> you haven't >> successfully run the btape test and fill commands, in which case, >> you Device >> resource is not properly configured for your OS/drive. >> > > We have been seeing this irregularly too, usually when there are > multiple > jobs writing to the same volume simultaneously. > > The wierd thing is that when I've checked the volumes, they are no > longer > in error mode. > I've seen this now and again, as well, in my 3-drive autochanger. I haven't had the time to put together a proper bug report, but from cursory examination, it appears to be a problem when a job wants a tape that is already in use and therefore expects its file count to be what it was when the job started. Here's an example: ** First Job, Success ** 16-Nov 01:00 sbgrid-dir: Start Backup JobId 582, Job=CRYSTAL_HOME. 2006-11-16_01.00.00 16-Nov 00:47 home-fd: DIR and FD clocks differ by -763 seconds, FD automatically adjusting. 16-Nov 01:00 sbgrid-sd: Spooling data ... 16-Nov 01:44 sbgrid-sd: Job write elapsed time = 00:44:44, Transfer rate = 7.630 M bytes/second 16-Nov 01:44 sbgrid-sd: Committing spooled data to Volume "000005L2". Despooling 20,500,358,128 bytes ... ---> second job starts here <--- 16-Nov 02:00 sbgrid-sd: Despooling elapsed time = 00:15:48, Transfer rate = 21.62 M bytes/second 16-Nov 02:01 sbgrid-sd: Sending spooled attrs to the Director. Despooling 2,224,240 bytes ... 16-Nov 02:02 sbgrid-dir: Bacula 1.39.22 (09Sep06): 16-Nov-2006 02:02:07 ** Second Job, Error ** 16-Nov 02:00 sbgrid-dir: Start Backup JobId 584, Job=FS4_XRAY. 2006-11-16_02.00.01 16-Nov 01:48 xray-fd: DIR and FD clocks differ by -763 seconds, FD automatically adjusting. 16-Nov 02:01 sbgrid-sd: 3301 Issuing autochanger "loaded? drive 2" command. 16-Nov 02:01 sbgrid-sd: 3302 Autochanger "loaded? drive 2", result: nothing loaded. 16-Nov 02:01 sbgrid-sd: 3307 Issuing autochanger "unload slot 5, drive 0" command. 16-Nov 02:02 sbgrid-sd: 3304 Issuing autochanger "load slot 5, drive 2" command. 16-Nov 02:03 sbgrid-sd: 3305 Autochanger "load slot 5, drive 2", status is OK. 16-Nov 02:03 sbgrid-sd: 3301 Issuing autochanger "loaded? drive 2" command. 16-Nov 02:03 sbgrid-sd: 3302 Autochanger "loaded? drive 2", result is Slot 5. 16-Nov 02:03 sbgrid-sd: Volume "000005L2" previously written, moving to end of data. 16-Nov 02:04 sbgrid-sd: FS4_XRAY.2006-11-16_02.00.01 Error: I cannot write on Volume "000005L2" because: The number of files mismatch! Volume=118 Catalog=117 Best regards, Ian ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
