Hi i try to configure bacula to backup data to a Sony StorStation LIB-81 autochanger (200GB/520GB AIT4). The System I use is Debian GNU/Linux 4.0 "Etch".
If I run btape -c /etc/bacula/bacula-sd.conf -f /dev/sg3 the following error appear: Tape block granularity is 1024 bytes. btape: butil.c:272 Using device: "/dev/sg3" for writing. 17-Okt 13:37 btape: 3301 Issuing autochanger "loaded drive 0" command. 17-Okt 13:37 btape: 3302 Autochanger "loaded drive 0", result is Slot 1. 17-Okt 13:37 btape: 3301 Issuing autochanger "loaded drive 0" command. 17-Okt 13:37 btape: 3302 Autochanger "loaded drive 0", result is Slot 1. btape: btape.c:338 open device "Sony LIB-81 AIT4" (/dev/sg3): OK *auto Ah, I see you have an autochanger configured. To test the autochanger you must have a blank tape that I can write on in Slot 1. Do you wish to continue with the Autochanger test? (y/n): y === Autochanger test === 3301 Issuing autochanger "loaded" command. Slot 1 loaded. I am going to unload it. 3302 Issuing autochanger "unload 1 0" command. Can anyone help me to configure bacula correctly? Best wishes Stefan -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users