What's the difference between st0 and nst0?
On 12/11/07, Gary Danko <[EMAIL PROTECTED]> wrote: > Thanks to everyone for helping me get the changer recognized. The last > changer I used with Bacula was a 15 slot AIT4 Sony unit. This ML6020 is a > beast in comparison. I ran the btape test as described in the manual: > > /usr/local/bacula/sbin/btape -c /usr/local/bacula/etc/bacula-sd.conf/dev/st0 > > All of the tests on /dev/st0 passed and then I get this: > > Ah, I see you have an autochanger configured. > To test the autochanger you must have a blank tape > that I can write on in Slot 1. > > Do you wish to continue with the Autochanger test? (y/n): y > > So I go on to the changer test and I get this: > > === Autochanger test === > > 3301 Issuing autochanger "loaded" command. > Nothing loaded in the drive. OK. > 3303 Issuing autochanger "load 1 0" command. > 3993 Bad autochanger command: /usr/local/bacula/etc/mtx-changer /dev/sg4 > load 1 /dev/st0 0 > 3993 result="Loading media from Storage Element 1 into drive 0...Source > Element Address 4096 is Empty > ": ERR=Child exited with code 1 > You must correct this error or the Autochanger will not work. > > Now I loaded 20 tapes into this unit. There are 122 slots available for > backups (there other 8 are the import/export slots).. I know the slot > location information on the Dell ML6020 uses an x,y,z schema to determine > location. How do you identify the slot numbers on this changer using > mtx/mtx-changer? Anyone here have experience with the ML60xx series of > changers? > ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users