Gary Danko wrote: > What's the difference between st0 and nst0? When you use /dev/nst0 it leaves the tape positioned at where it stopped when the previous job finished. If you use /dev/st0 it automatically rewinds to the beginning after each operation.
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users