Am 25.06.24 um 17:43 schrieb Martin Simmons:
On Tue, 25 Jun 2024 12:59:03 +0200, Stefan G Weichinger said:
I see various issues, maybe related to defective tapes also.
Volumes that are in mode "Append" are loaded and not written to as in:
25-Jun 12:52 samba-sd JobId 2840: 3304 Issuing autochanger "load Volume
CMR945L6, Slot 6, Drive 0" command.
25-Jun 12:52 samba-sd JobId 2840: 3305 Autochanger "load Volume
CMR945L6, Slot 6, Drive 0", status is OK.
25-Jun 12:53 samba-sd JobId 2840: Volume "CMR945L6" previously written,
moving to end of data.
25-Jun 12:53 samba-sd JobId 2840: Warning: For Volume "CMR945L6":
The number of files mismatch! Volume=350 Catalog=349
Correcting Catalog
25-Jun 12:53 samba-sd JobId 2840: [SI0202] End of Volume "CMR945L6" at
350:1 on device "HP-Ultrium" (/dev/nst0). Write of 262144 bytes got -1.
25-Jun 12:53 samba-sd JobId 2840: Re-read of last block succeeded.
25-Jun 12:53 samba-sd JobId 2840: End of medium on Volume "CMR945L6"
Bytes=1,310,721 Blocks=1 at 25-Jun-2024 12:53.
25-Jun 12:53 samba-sd JobId 2840: 3307 Issuing autochanger "unload
Volume CMR945L6, Slot 6, Drive 0" command.
25-Jun 12:54 samba-sd JobId 2840: 3304 Issuing autochanger "load Volume
CMR915L6, Slot 5, Drive 0" command.
I "Purge" them, mark them as "Append" ... doesn't work.
Don't manually mark them as "Append" because that tells Bacula to wind forward
to the end of the data before writing. The "Purge" operation just affects the
catalog, not the data on the tape.
If configured correctly, Bacula should automatically reuse tapes that have
been marked as purged (either explicitly marked or implicitly after the
retention time has expired).
So I only "Purge" a "Full" tape?
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
