Chris Frey a écrit:
> On Fri, Nov 07, 2008 at 10:54:42AM +0100, Bruno D'Arcangeli wrote:
> > > > You will need to add the 10-blackberry.rules file to /etc/udev/rules.d
> > > > and make sure you have bcharge installed under /usr/sbin.  Also install
> > > > the modprobe/blacklist-berry_charge under /etc/modprobe.d.
> > > With this, i can run tool like bcharge as normal user with success but
> > > i've always the same error with msynctool.
> > After a reboot, i can't use btool (for example) as normal user. Only
> > bcharge work.
> 
> See the documentation at:
> 
>       http://www.netdirect.ca/software/packages/barry/requirements.php
> 
> Section: Device Ownership and Permissions
I 've read that doc more than one time ;-)

> I'm not as familiar with ArchLinux, so I'm not sure if it is a group based
> permissions like Debian, or whether it uses ConsoleKit like Fedora.
It's group based, like debian.
   
> > > >         - the udev rules change the permissions of your device so you 
> > > > can
> > > >                 use it as a regular user
> > I'll try to see if ther is something wrong with udev.
> 
> Check to see if bcharge is getting run automatically when you plug it in.
> You can check this indirectly by checking the results:
> 
>       - make sure you're not running the berry_charge module
>               lsmod | grep berry
Ok (berry_charge isn't loaded)

>       - check MaxPower and the ProductID
>               lsusb -v
Ok (MaxPower 500mA)
 
> If bcharge is being run automatically, then udev is likely setup correctly,
> and it is a permissions problem elsewhere in the system.

[EMAIL PROTECTED] ~]$ ls -l /dev/bb-*
lrwxrwxrwx 1 root root 15 nov. 10 14:53 /dev/bb-6-1 -> bus/usb/006/007
lrwxrwxrwx 1 root root  9 nov. 10 14:53 /dev/bb-usbdev6.7 -> usbdev6.7
[EMAIL PROTECTED] ~]$ ls -l /dev/usbdev6.7
crw-rw---- 1 root barry 189, 646 nov. 10 14:53 /dev/usbdev6.7
[EMAIL PROTECTED] ~]$ ls -l /dev/bus/usb/006/007
crw-r--r-- 1 root barry 189, 646 nov. 10 14:53 /dev/bus/usb/006/007

/dev/usbdev6.7 is writable by group member but not /dev/bus/usb/006/007.
Is this normal ?

Bruno

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Barry-devel mailing list
Barry-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/barry-devel

Reply via email to