On 19/03/13 15:11, Raymond Norton wrote:
Just an FYI to list members that helped me trouble shoot this issue
last week. I was able to get celeryd running fine, as long as I did
not execute this line from the tutorial:
rm --r /usr/share/pyshared/baruwa/settings.py && ln --s
/etc/baruwa/settings.py /usr/share/pyshared/baruwa/
Just tested it again on a clone of my vm and now celeryd will not run.
--
This message has been scanned for viruses and
dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is
believed to be clean.
_______________________________________________
Keep Baruwa FREE - http://pledgie.com/campaigns/12056
Bit strange this, if you examine the deb that you download from the
spamsnake instructions, you will find that what 'rm --r
/usr/share/pyshared/baruwa/settings.py && ln --s /etc/baruwa/settings.py
/usr/share/pyshared/baruwa/' does is this:
It removes a symbolic link to /etc/baruwa/settings.py and then recreates
it in exactly the same place.
So if it is failing, there must be a fault in the way you entered the
command, cut & paste by any chance?
Anyway, whatever the reason it failed, it appears to be a pointless
exercise, so IMHO, just don't bother with the command, it, as you say,
works anyway without it.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
Keep Baruwa FREE - http://pledgie.com/campaigns/12056
