Ruggiero wrote: > i just installed fedora7 and the firmware 4 by bcm43xx_fwcutter,it's a > bit different by ubuntu because i don't have the command iwconfig and > iwlist scan,how can i verify the card is working properly?here there is > some informations: > i have a b44ethernet card in the laptop > > [EMAIL PROTECTED] ~]$ dmesg|grep bcm > bcm43xx_mac80211: Broadcom 4311 WLAN found > bcm43xx_mac80211: Found PHY: Analog 4, Type 2, Revision 8 > bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 > bcm43xx_mac80211: Radio turned off > bcm43xx_mac80211: Adding Interface type 2 > bcm43xx_mac80211: Loading firmware version 351.126 (2006-07-29 05:54:02) > bcm43xx_mac80211: Radio turned on > bcm43xx_mac80211: Radio enabled by hardware > bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring > failed. (cur=5, tgt=62). Disabling TX power adjustment. > bcm43xx_mac80211: Chip initialized > bcm43xx_mac80211: 32-bit DMA initialized > bcm43xx_mac80211: Wireless interface started >
I think the WEX commands are there, just not in your path. Try /sbin/iwconfig, etc. Larry _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
