On Wednesday 08 April 2009 02:11:16 Michael Buesch wrote:
> Completely untested patch to implement firmware capabilities
> and automagic QoS-disabling.
> 

So could somebody who uses opensource fw test this?

Module parameter qos=0 should not be needed anymore. So please test opensource 
fw
with qos=1.


> Index: wireless-testing/drivers/net/wireless/b43/b43.h
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/b43.h      2009-04-07 
> 19:52:34.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/b43.h   2009-04-08 
> 01:57:58.000000000 +0200
> @@ -163,6 +163,7 @@ enum {
>  #define B43_SHM_SH_WLCOREREV         0x0016  /* 802.11 core revision */
>  #define B43_SHM_SH_PCTLWDPOS         0x0008
>  #define B43_SHM_SH_RXPADOFF          0x0034  /* RX Padding data offset (PIO 
> only) */
> +#define B43_SHM_SH_FWCAPA            0x0042  /* Firmware capabilities 
> (Opensource firmware only) */
>  #define B43_SHM_SH_PHYVER            0x0050  /* PHY version */
>  #define B43_SHM_SH_PHYTYPE           0x0052  /* PHY type */
>  #define B43_SHM_SH_ANTSWAP           0x005C  /* Antenna swap threshold */
> @@ -297,6 +298,10 @@ enum {
>  #define B43_HF_MLADVW                0x001000000000ULL /* N PHY ML ADV 
> workaround (rev >= 13 only) */
>  #define B43_HF_PR45960W              0x080000000000ULL /* PR 45960 
> workaround (rev >= 13 only) */
>  
> +/* Firmware capabilities field in SHM (Opensource firmware only) */
> +#define B43_FWCAPA_HWCRYPTO  0x0001
> +#define B43_FWCAPA_QOS               0x0002
> +
>  /* MacFilter offsets. */
>  #define B43_MACFILTER_SELF           0x0000
>  #define B43_MACFILTER_BSSID          0x0003
> @@ -596,6 +601,13 @@ struct b43_wl {
>       /* Pointer to the ieee80211 hardware data structure */
>       struct ieee80211_hw *hw;
>  
> +     /* The number of queues that were registered with the mac80211 subsystem
> +      * initially. This is a backup copy of hw->queues in case hw->queues has
> +      * to be dynamically lowered at runtime (Firmware does not support QoS).
> +      * hw->queues has to be restored to the original value before 
> unregistering
> +      * from the mac80211 subsystem. */
> +     u16 mac80211_initially_registered_queues;
> +
>       struct mutex mutex;
>       spinlock_t irq_lock;
>       /* R/W lock for data transmission.
> @@ -752,6 +764,8 @@ struct b43_wldev {
>       bool dfq_valid;         /* Directed frame queue valid (IBSS PS mode, 
> ATIM) */
>       bool radio_hw_enable;   /* saved state of radio hardware enabled state 
> */
>       bool suspend_in_progress;       /* TRUE, if we are in a suspend/resume 
> cycle */
> +     bool qos_enabled;               /* TRUE, if QoS is used. */
> +     bool hwcrypto_enabled;          /* TRUE, if HW crypto acceleration is 
> enabled. */
>  
>       /* PHY/Radio device. */
>       struct b43_phy phy;
> Index: wireless-testing/drivers/net/wireless/b43/dma.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/dma.c      2009-04-07 
> 19:58:22.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/dma.c   2009-04-08 
> 01:53:56.000000000 +0200
> @@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_b
>  {
>       struct b43_dmaring *ring;
>  
> -     if (b43_modparam_qos) {
> +     if (dev->qos_enabled) {
>               /* 0 = highest priority */
>               switch (queue_prio) {
>               default:
> Index: wireless-testing/drivers/net/wireless/b43/main.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/main.c     2009-04-07 
> 19:55:03.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/main.c  2009-04-08 
> 02:02:19.000000000 +0200
> @@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
>  module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
>  MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
>  
> -int b43_modparam_qos = 1;
> -module_param_named(qos, b43_modparam_qos, int, 0444);
> +static int modparam_qos = 1;
> +module_param_named(qos, modparam_qos, int, 0444);
>  MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
>  
>  static int modparam_btcoex = 1;
> @@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev,
>       b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
>  }
>  
> +/* Read the firmware capabilities bitmask (Opensource firmware only) */
> +static u16 b43_fwcapa_read(struct b43_wldev *dev)
> +{
> +     B43_WARN_ON(!dev->fw.opensource);
> +     return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
> +}
> +
>  void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
>  {
>       u32 low, high;
> @@ -2330,12 +2337,34 @@ static int b43_upload_microcode(struct b
>       dev->fw.patch = fwpatch;
>       dev->fw.opensource = (fwdate == 0xFFFF);
>  
> +     /* Default to use-all-queues. */
> +     dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
> +     dev->qos_enabled = !!modparam_qos;
> +     /* Default to firmware/hardware crypto acceleration. */
> +     dev->hwcrypto_enabled = 1;
> +
>       if (dev->fw.opensource) {
> +             u16 fwcapa;
> +
>               /* Patchlevel info is encoded in the "time" field. */
>               dev->fw.patch = fwtime;
> -             b43info(dev->wl, "Loading OpenSource firmware version 
> %u.%u%s\n",
> -                     dev->fw.rev, dev->fw.patch,
> -                     dev->fw.pcm_request_failed ? " (Hardware crypto not 
> supported)" : "");
> +             b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
> +                     dev->fw.rev, dev->fw.patch);
> +
> +             fwcapa = b43_fwcapa_read(dev);
> +             if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || 
> dev->fw.pcm_request_failed) {
> +                     b43info(dev->wl, "Hardware crypto acceleration not 
> supported by firmware\n");
> +                     /* Disable hardware crypto and fall back to software 
> crypto. */
> +                     dev->hwcrypto_enabled = 0;
> +             }
> +             if (!(fwcapa & B43_FWCAPA_QOS)) {
> +                     b43info(dev->wl, "QoS not supported by firmware\n");
> +                     /* Disable QoS. Tweak hw->queues to 1. It will be 
> restored before
> +                      * ieee80211_unregister to make sure the networking 
> core can
> +                      * properly free possible resources. */
> +                     dev->wl->hw->queues = 1;
> +                     dev->qos_enabled = 0;
> +             }
>       } else {
>               b43info(dev->wl, "Loading firmware version %u.%u "
>                       "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
> @@ -3626,7 +3655,7 @@ static int b43_op_set_key(struct ieee802
>       if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
>               goto out_unlock;
>  
> -     if (dev->fw.pcm_request_failed) {
> +     if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
>               /* We don't have firmware for the crypto engine.
>                * Must use software-crypto. */
>               err = -EOPNOTSUPP;
> @@ -4770,6 +4799,7 @@ static int b43_wireless_init(struct ssb_
>               b43err(NULL, "Could not allocate ieee80211 device\n");
>               goto out;
>       }
> +     wl = hw_to_b43_wl(hw);
>  
>       /* fill hw info */
>       hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
> @@ -4783,7 +4813,8 @@ static int b43_wireless_init(struct ssb_
>               BIT(NL80211_IFTYPE_WDS) |
>               BIT(NL80211_IFTYPE_ADHOC);
>  
> -     hw->queues = b43_modparam_qos ? 4 : 1;
> +     hw->queues = modparam_qos ? 4 : 1;
> +     wl->mac80211_initially_registered_queues = hw->queues;
>       hw->max_rates = 2;
>       SET_IEEE80211_DEV(hw, dev->dev);
>       if (is_valid_ether_addr(sprom->et1mac))
> @@ -4791,9 +4822,7 @@ static int b43_wireless_init(struct ssb_
>       else
>               SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
>  
> -     /* Get and initialize struct b43_wl */
> -     wl = hw_to_b43_wl(hw);
> -     memset(wl, 0, sizeof(*wl));
> +     /* Initialize struct b43_wl */
>       wl->hw = hw;
>       spin_lock_init(&wl->irq_lock);
>       rwlock_init(&wl->tx_lock);
> @@ -4859,8 +4888,13 @@ static void b43_remove(struct ssb_device
>       cancel_work_sync(&wldev->restart_work);
>  
>       B43_WARN_ON(!wl);
> -     if (wl->current_dev == wldev)
> +     if (wl->current_dev == wldev) {
> +             /* Restore the queues count before unregistering, because 
> firmware detect
> +              * might have modified it. Restoring is important, so the 
> networking
> +              * stack can properly free resources. */
> +             wl->hw->queues = wl->mac80211_initially_registered_queues;
>               ieee80211_unregister_hw(wl->hw);
> +     }
>  
>       b43_one_core_detach(dev);
>  
> Index: wireless-testing/drivers/net/wireless/b43/main.h
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/main.h     2009-04-08 
> 01:53:15.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/main.h  2009-04-08 
> 01:53:20.000000000 +0200
> @@ -39,7 +39,6 @@
>  #define PAD_BYTES(nr_bytes)          P4D_BYTES( __LINE__ , (nr_bytes))
>  
>  
> -extern int b43_modparam_qos;
>  extern int b43_modparam_verbose;
>  
>  /* Logmessage verbosity levels. Update the b43_modparam_verbose helptext, if
> Index: wireless-testing/drivers/net/wireless/b43/pio.c
> ===================================================================
> --- wireless-testing.orig/drivers/net/wireless/b43/pio.c      2009-04-08 
> 02:10:23.000000000 +0200
> +++ wireless-testing/drivers/net/wireless/b43/pio.c   2009-04-08 
> 02:10:38.000000000 +0200
> @@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_qu
>  {
>       struct b43_pio_txqueue *q;
>  
> -     if (b43_modparam_qos) {
> +     if (dev->qos_enabled) {
>               /* 0 = highest priority */
>               switch (queue_prio) {
>               default:
> 
> 



-- 
Greetings, Michael.
_______________________________________________
Bcm43xx-dev mailing list
Bcm43xx-dev@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev

Reply via email to