On 11/15/2009 03:40 PM, Michael Buesch wrote:
> On Saturday 14 November 2009 21:20:28 Michael Buesch wrote:
>> Yeah, ok. That doesn't seem to be a bug in b43 then. It's the CRDA subsystem
>> waiting for a userspace daemon. But it won't finish waiting, because 
>> userspace
>> is not running, yet. I guess running cfg80211 as module is an acceptable 
>> workaround for now.
>
> We cannot reproduce this problem and it seems unlikely to be a CRDA issue, 
> because
> it doesn't actually wait for userspace in that code.
> So we won't investigate further on this issue for now, as long as there's no 
> new information
> on how to reproduce this.
>

Here's a little update on the issue. It isn't b43 that freezes the
system but ssb.ko, but only if the B43 option is set. I poked around
in the sbb code and found that ssb_do_read never returns:

<snip>
static int sprom_do_read(struct ssb_bus *bus, u16 *sprom)
{
         int i;
         for (i = 0; i < bus->sprom_size; i++)
           sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
         return 0;
}

</snip>

So I guess the mmio address is wrong. It is set to decimal -133791744 
when it freezes. I don't know if that's a valid mmio address but it 
seems fishy.

Sebastian

Here comes a lspci -vvnn

<snip>
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express 
Memory Controller Hub [8086:27ac] (rev 03)
         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
         Latency: 0 

         Capabilities: [e0] Vendor Specific Information <?> 

         Kernel driver in use: agpgart-intel 


00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 
945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 
(prog-if 00 [VGA controller]) 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin A routed to IRQ 11 

         Region 0: Memory at 58280000 (32-bit, non-prefetchable) 
[size=512K]
         Region 1: I/O ports at 60f0 [size=8] 

         Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M] 

         Region 3: Memory at 58300000 (32-bit, non-prefetchable) 
[size=256K]
         Expansion ROM at <unassigned> [disabled] 

         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- 

                 Address: 00000000  Data: 0000 

         Capabilities: [d0] Power Management version 2 

                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 


00:02.1 Display controller [0380]: Intel Corporation Mobile 
945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller 
[8086:27a6] (rev 03) 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Region 0: Memory at 58200000 (32-bit, non-prefetchable) 
[size=512K]
         Capabilities: [d0] Power Management version 2 

                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 


00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller [8086:27d8] (rev 02) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin A routed to IRQ 16 

         Region 0: Memory at 58340000 (64-bit, non-prefetchable) 
[size=16K]
         Capabilities: [50] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+ 

                 Address: 0000000000000000  Data: 0000 

         Capabilities: [70] Express (v1) Root Complex Integrated 
Endpoint, MSI 00
                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
<64ns, L1 <1us
                         ExtTag- RBE- FLReset- 

                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ 

                         MaxPayload 128 bytes, MaxReadReq 128 bytes 

                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr+ TransPend-
                 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, 
Latency L0 <64ns, L1 <1us
                         ClockPM- Surprise- LLActRep- BwNot- 

                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- 

                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- 

                 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
         Capabilities: [100] Virtual Channel <?> 

         Capabilities: [130] Root Complex Link <?> 

         Kernel driver in use: HDA Intel 


00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) 
 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 

         I/O behind bridge: 00005000-00005fff 

         Memory behind bridge: 57100000-581fffff 

         Prefetchable memory behind bridge: 
0000000050000000-0000000050ffffff
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 

                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 

         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 

                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                         ExtTag- RBE- FLReset- 

                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 

                         MaxPayload 128 bytes, MaxReadReq 128 bytes 

                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr+ TransPend-
                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <256ns, L1 <4us
                         ClockPM- Surprise- LLActRep+ BwNot- 

                 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- 
Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- 

                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
HotPlug+ Surpise+
                         Slot #  0, PowerLimit 6.500000; Interlock- 
NoCompl-
                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
HPIrq- LinkChg-
                         Control: AttnInd Unknown, PwrInd Unknown, 
Power- Interlock-
                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
PresDet+ Interlock-
                         Changed: MRL- PresDet+ LinkState+ 

                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
PMEIntEna- CRSVisible-
                 RootCap: CRSVisible- 

                 RootSta: PME ReqID 0000, PMEStatus- PMEPending- 

         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- 

                 Address: fee0300c  Data: 4169 

         Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 
[1025:022f]
         Capabilities: [a0] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [100] Virtual Channel <?> 

         Capabilities: [180] Root Complex Link <?> 

         Kernel driver in use: pcieport-driver 


00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) 
 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 

         I/O behind bridge: 00004000-00004fff 

         Memory behind bridge: 56100000-570fffff 

         Prefetchable memory behind bridge: 
0000000051000000-0000000051ffffff
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 

                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 

         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 

                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                         ExtTag- RBE- FLReset- 

                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 

                         MaxPayload 128 bytes, MaxReadReq 128 bytes 

                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr+ TransPend-
                 LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <1us, L1 <4us
                         ClockPM- Surprise- LLActRep+ BwNot- 

                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- 

                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
HotPlug+ Surpise+
                         Slot #  1, PowerLimit 6.500000; Interlock- 
NoCompl-
                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
HPIrq- LinkChg-
                         Control: AttnInd Unknown, PwrInd Unknown, 
Power- Interlock-
                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
PresDet- Interlock-
                         Changed: MRL- PresDet- LinkState- 

                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
PMEIntEna- CRSVisible-
                 RootCap: CRSVisible- 

                 RootSta: PME ReqID 0000, PMEStatus- PMEPending- 

         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- 

                 Address: fee0300c  Data: 4171 

         Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 
[1025:022f]
         Capabilities: [a0] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [100] Virtual Channel <?> 

         Capabilities: [180] Root Complex Link <?> 

         Kernel driver in use: pcieport-driver 


00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) 
 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 

         I/O behind bridge: 00002000-00003fff 

         Memory behind bridge: 55000000-560fffff 

         Prefetchable memory behind bridge: 
0000000052000000-0000000052ffffff
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 

                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 

         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 

                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                         ExtTag- RBE- FLReset- 

                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 

                         MaxPayload 128 bytes, MaxReadReq 128 bytes 

                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr+ TransPend-
                 LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <256ns, L1 <4us
                         ClockPM- Surprise- LLActRep+ BwNot- 

                 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- 
Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- 

                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
HotPlug+ Surpise+
                         Slot #  2, PowerLimit 6.500000; Interlock- 
NoCompl-
                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
HPIrq- LinkChg-
                         Control: AttnInd Unknown, PwrInd Unknown, 
Power- Interlock-
                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
PresDet+ Interlock-
                         Changed: MRL- PresDet+ LinkState+ 

                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
PMEIntEna- CRSVisible-
                 RootCap: CRSVisible- 

                 RootSta: PME ReqID 0000, PMEStatus- PMEPending- 

         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- 

                 Address: fee0300c  Data: 4179 

         Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 
[1025:022f]
         Capabilities: [a0] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [100] Virtual Channel <?> 

         Capabilities: [180] Root Complex Link <?> 

         Kernel driver in use: pcieport-driver 


00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI 
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) 
 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 

         I/O behind bridge: 00001000-00001fff 

         Memory behind bridge: 54000000-54ffffff 

         Prefetchable memory behind bridge: 
0000000053000000-0000000053ffffff
         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 

                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 

         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 

                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                         ExtTag- RBE- FLReset- 

                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 

                         MaxPayload 128 bytes, MaxReadReq 128 bytes 

                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
AuxPwr+ TransPend-
                 LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <1us, L1 <4us
                         ClockPM- Surprise- LLActRep+ BwNot- 

                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- 

                 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
HotPlug+ Surpise+
                         Slot #  0, PowerLimit 6.500000; Interlock- 
NoCompl-
                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
HPIrq- LinkChg-
                         Control: AttnInd Unknown, PwrInd Unknown, 
Power- Interlock-
                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
PresDet- Interlock-
                         Changed: MRL- PresDet- LinkState- 

                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
PMEIntEna- CRSVisible-
                 RootCap: CRSVisible- 

                 RootSta: PME ReqID 0000, PMEStatus- PMEPending- 

         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- 

                 Address: fee0300c  Data: 4181 

         Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 
[1025:022f]
         Capabilities: [a0] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [100] Virtual Channel <?> 

         Capabilities: [180] Root Complex Link <?> 

         Kernel driver in use: pcieport-driver 


00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) 
USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin A routed to IRQ 16 

         Region 4: I/O ports at 60a0 [size=32] 

         Kernel driver in use: uhci_hcd 


00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) 
USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin B routed to IRQ 17 

         Region 4: I/O ports at 6080 [size=32] 

         Kernel driver in use: uhci_hcd 


00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) 
USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin C routed to IRQ 18 

         Region 4: I/O ports at 6060 [size=32] 

         Kernel driver in use: uhci_hcd 


00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) 
USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin D routed to IRQ 19 

         Region 4: I/O ports at 6040 [size=32] 

         Kernel driver in use: uhci_hcd 


00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) 
USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin A routed to IRQ 16 

         Region 0: Memory at 58344400 (32-bit, non-prefetchable) 
[size=1K]
         Capabilities: [50] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Capabilities: [58] Debug port: BAR=1 offset=00a0 

         Kernel driver in use: ehci_hcd 


00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) 
 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 

         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 

                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 

         Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 
[1025:022f]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC 
Interface Bridge [8086:27b9] (rev 02)
         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Capabilities: [e0] Vendor Specific Information <?> 


00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) 
 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
         Latency: 0 

         Interrupt: pin A routed to IRQ 16 

         Region 0: I/O ports at 01f0 [size=8] 

         Region 1: I/O ports at 03f4 [size=1] 

         Region 2: I/O ports at 0170 [size=8] 

         Region 3: I/O ports at 0374 [size=1] 

         Region 4: I/O ports at 60c0 [size=16] 

         Kernel driver in use: ata_piix 


00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 
Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 
1.0]) 

         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin B routed to IRQ 28 

         Region 0: I/O ports at 60d8 [size=8] 

         Region 1: I/O ports at 60fc [size=4] 

         Region 2: I/O ports at 60d0 [size=8] 

         Region 3: I/O ports at 60f8 [size=4] 

         Region 4: I/O ports at 6020 [size=16] 

         Region 5: Memory at 58344000 (32-bit, non-prefetchable) 
[size=1K]
         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- 

                 Address: fee0200c  Data: 4189 

         Capabilities: [70] Power Management version 2 

                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 

         Kernel driver in use: ahci 


00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus 
Controller [8086:27da] (rev 02)
         Subsystem: Acer Incorporated [ALI] Device [1025:022f] 

         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Interrupt: pin B routed to IRQ 17 

         Region 4: I/O ports at 6000 [size=32] 

         Kernel driver in use: i801_smbus 


01:00.0 Network controller [0280]: Broadcom Corporation BCM4312 
802.11b/g [14e4:4315] (rev 01)
         Subsystem: Foxconn International, Inc. Device [105b:e01b] 

         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0 

         Interrupt: pin A routed to IRQ 16 

         Region 0: Memory at 57100000 (64-bit, non-prefetchable) 
[size=16K]
         Capabilities: [40] Power Management version 3 

                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME- 

         Capabilities: [58] Vendor Specific Information <?> 

         Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+ 

                 Address: 0000000000000000  Data: 0000
         Capabilities: [d0] Express (v1) Endpoint, MSI 00
                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
<4us, L1 unlimited
                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                         MaxPayload 128 bytes, MaxReadReq 128 bytes
                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ 
AuxPwr- TransPend-
                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 <4us, L1 <64us
                         ClockPM+ Surprise- LLActRep- BwNot-
                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- 
Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
         Capabilities: [100] Advanced Error Reporting
                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                 CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr+
                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr+
                 AERCap: First Error Pointer: 14, GenCap+ CGenEn- 
ChkCap+ ChkEn-
         Capabilities: [13c] Virtual Channel <?>
         Capabilities: [160] Device Serial Number 00-00-00-ff-ff-00-ff-ff
         Capabilities: [16c] Power Budgeting <?>
         Kernel driver in use: b43-pci-bridge

03:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device 
[1969:1062] (rev c0)
         Subsystem: Acer Incorporated [ALI] Device [1025:022f]
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx+
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0
         Interrupt: pin A routed to IRQ 29
         Region 0: Memory at 55000000 (64-bit, non-prefetchable) [size=256K]
         Region 2: I/O ports at 2000 [size=128]
         Capabilities: [40] Power Management version 3
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
                 Address: 00000000fee0200c  Data: 4191
         Capabilities: [58] Express (v1) Endpoint, MSI 00
                 DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s 
<4us, L1 unlimited
                         ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                         MaxPayload 128 bytes, MaxReadReq 512 bytes
                 DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ 
AuxPwr+ TransPend-
                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, 
Latency L0 unlimited, L1 unlimited
                         ClockPM+ Surprise- LLActRep- BwNot-
                 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- 
Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
         Capabilities: [6c] Vital Product Data
                 Not readable
         Capabilities: [100] Advanced Error Reporting
                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                 UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- 
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr-
                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr+
                 AERCap: First Error Pointer: 14, GenCap+ CGenEn- 
ChkCap+ ChkEn-
         Capabilities: [180] Device Serial Number ff-13-f3-bf-00-26-22-ff
         Kernel driver in use: atl1c
         Kernel modules: atl1c

</snip>
_______________________________________________
Bcm43xx-dev mailing list
Bcm43xx-dev@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev

Reply via email to