Has anyone managed to get this kernel to work on the BBB?
Regards,
Dave.
On 13-10-12 07:43 PM, David Lambert wrote:
I forgot to use earlyprintk :-[ Here is the screenlog with it enabled.
On 13-10-12 04:21 PM, David Lambert wrote:
On 13-10-11 02:51 PM, Robert Nelson wrote:
ah... okay because uImage gets interesting in v3.12
make ARCH=arm LOADADDR=0x80008000 uImage
Regards,
OK I got the kernel, modules and firmware to buid eventually (forgot
uboot-mkimage).
Commands used were:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000
uImage dtbs
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000
modules
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
INSTALL_MOD_PATH=./tempmod LOADADDR=0x80008000 modules_install
Now I am stuck at boot, see screenlog attached.
Any ideas?
Regards,
Dave.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
