On Fri, Oct 11, 2013 at 8:53 AM, Jason Kridner <jason.krid...@hangerhead.com> wrote: > On Fri, Oct 11, 2013 at 8:51 AM, Robert Nelson <robertcnel...@gmail.com> > wrote: >> On Thu, Oct 10, 2013 at 10:06 PM, Jason Kridner >> <jkrid...@beagleboard.org> wrote: >>> On Thu, Oct 10, 2013 at 8:09 PM, Robert Nelson <robertcnel...@gmail.com> >>> wrote: >>>> So here is the deal; 3.8 is old, and 3.12-rc4 is newer/better/etc... >>>> >>>> Functionally, it seems ready in my small 5 board sample size. 3 of >>>> which have been running 24/7 @ 100% since rc3.. >>>> >>>> Anywho, we need community testing. (Here's looking at you!) >>>> >>>> Kernel Branch: >>>> https://github.com/beagleboard/linux/tree/3.12 >>> >>> I probably need to add the built M3 firmware and copy the defconfig >>> over from the other tree. Thoughts? >> >> It should be part of the build already.. >> https://github.com/beagleboard/kernel/blob/3.12/patches/general-fixes/0001-add-PM-firmware.patch > > Sorry, I did notice it is in there. I won't update it until I have > things otherwise working. > >> >> but is it "new" enough, probally should pull from the *.bin repo again.. >> >>> I'm seeing an error in the am335x-boneblack.dts where emmc_pins isn't >>> defined. Anybody have a definition for that? >>> >>> The kernel also seems to be missing the reset control line which is >>> critical for disabling the eMMC. >> >> I didn't notice those issues, I'll take a look today at it.. > > I'm back to playing with this today in hopes of enabling more people > to do some testing, but it seems we still have quite a few out-of-tree > patches. > > I don't see this one from Koen in the patches: > https://lkml.org/lkml/2013/9/12/427 > > That should fix emmc pins. The tree is missing just about everything > in firmware/capes, so those'll need to be applied as well.
Good point, i'm re-basing the patch set right now so we have all the changes from Benoit Cousson's tree for v3.13-rcX Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.