Crap. On third reboot (full power off/on), the device is experiencing the same musb: Babble Interrupt error as before.
So... this is a hardware issue? The BBB is powered by a separate adapter (not USB), so power shouldn't be the problem. On Friday, November 1, 2013 1:13:09 PM UTC-4, Philippe Laurent wrote: > > I resolved my issue by installing and using Ubuntu 13.04 on the BBB. It's > been up and running the python scanning script for over 24 hours, which is > roughly 23 hours longer than it has before. I used the instructions at > http://shrkey.com/setting-up-beaglebone-black-to-boot-off-the-microsd-card/to > get the installation squared away. > > On Wednesday, October 30, 2013 9:51:30 AM UTC-4, Bekir Bahadir wrote: >> >> Same problem here. Im also willing to pay for a solution >> >> Am Samstag, 31. August 2013 17:42:09 UTC+2 schrieb jez...@gmail.com: >>> >>> I'm using my Beaglebone Black with a USB temperature sensor. It works >>> very well, however I noticed monitoring stopped last night after roughly 35 >>> days uptime. This morning I looked more closely into the log file and >>> noticed: >>> >>> kernel: [2892926.929555] CAUTION: musb: Babble Interrupt Occurred >>> >>> I wasn't able to successfully reset the USB device and before I was able >>> to restart the BBB stopped responding. I power-cycled it and it was back to >>> normal again. Any ideas what caused this kernel message? >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
