The USB Host ports works fine on USB power, as long as the current is demand is low. To support higher current devices, you need to run it on DC power.
Gerald On Wed, Nov 13, 2013 at 1:15 AM, <hvn...@gmail.com> wrote: > Op dinsdag 12 november 2013 21:14:32 UTC+1 schreef lisarden: > >> Do you use a wall adapter or a usb port to power the board? >> > I'm using a wall adapter, since as stated in the manual, otherwise I can't > connect anything to the USB ports like that device or keyboard, mouse or > cam. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
