On Thu, Dec 12, 2013 at 12:24 PM, Ali <ghandour....@gmail.com> wrote: > Thanks Robert and Maxim. > I started again with a fresh git clone and was able to compile a new 3.2 > kernel. > > When I tried booting the compiled kernel on a BBB, it hits the following > error related to EEProm Configuration Option variable: > > ............................. > No daughter card found > [ 1.103912] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 > bytes/write > [ 1.119110] Board config.name: > A335BNLT0A5C3513BBBK0428�������������������������������� > [ 1.127502] Board name: A335BNLT > [ 1.130889] Board version: 0A5C > [ 1.134155] SKU: ������ > [ 1.136718] The error message above indicates that there is an issue with > [ 1.136718] the EEPROM or the EEPROM contents. After verifying the > EEPROM > [ 1.136718] contents, if any, refer to the am335x_evm_setup function in > the > [ 1.136718] arch/arm/mach-omap2/board-am335xevm.c file to modify the > board > [ 1.136749] initialization code to match the hardware configuration > .............................
Laughs, no it's working perfectly, ! As previous stated, " I never added BBB support to my 3.2 based kernel, I consider 3.2 long dead." AKA: DO NOT USE my 3.2 branch on the BBB, use 3.8... Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
