I have noticed that your are not supporting 3.2 kernel. But Maxim mentioned that he was able to run your 3.2 kernel on the BBB. That's why I was asking Maxim to provide me with the patched 3.2 kernel that he was able to run on the BBB.
On Thursday, December 12, 2013 8:26:51 PM UTC+2, RobertCNelson wrote: > > On Thu, Dec 12, 2013 at 12:24 PM, Ali <ghando...@gmail.com <javascript:>> > wrote: > > Thanks Robert and Maxim. > > I started again with a fresh git clone and was able to compile a new 3.2 > > kernel. > > > > When I tried booting the compiled kernel on a BBB, it hits the following > > error related to EEProm Configuration Option variable: > > > > ............................. > > No daughter card found > > [ 1.103912] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 > > bytes/write > > [ 1.119110] Board config.name: > > A335BNLT0A5C3513BBBK0428�������������������������������� > > [ 1.127502] Board name: A335BNLT > > [ 1.130889] Board version: 0A5C > > [ 1.134155] SKU: ������ > > [ 1.136718] The error message above indicates that there is an issue > with > > [ 1.136718] the EEPROM or the EEPROM contents. After verifying the > > EEPROM > > [ 1.136718] contents, if any, refer to the am335x_evm_setup function > in > > the > > [ 1.136718] arch/arm/mach-omap2/board-am335xevm.c file to modify the > > board > > [ 1.136749] initialization code to match the hardware configuration > > ............................. > > Laughs, no it's working perfectly, ! > > As previous stated, " I never added BBB support to my 3.2 based > kernel, I consider 3.2 long dead." > > AKA: DO NOT USE my 3.2 branch on the BBB, use 3.8... > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
