Is the USER LED flashing for you, or on solid? If its not flashing then I don't think the Cape has been identified by the BBB correctly. If you cant get it working, then you might have a dud one. Claim RMA and get it replaced.
On Thursday, 9 January 2014 06:36:35 UTC+13, Brian Yee wrote: > > > > Yes, I double checked the insertion of the board. Also, the LED's came on > and the reset and power switches worked ok. > I also flashed the latest image from the BeagleBoard.org site: > BBB-eMMC-flasher-2013.09.04.img.xz > with the same results. The images suggested earlier ( > BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/testing/BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz>) > > had some errors > when I tried to unpack them with 7-Zip. > > I may try ordering a cape from another vendor (Circuitco) and see if that > has the same problem. I am presuming it > uses the same driver. > > TIA for the dialog on this from everyone. > > Brian > > > > On Wed, Jan 8, 2014 at 9:12 AM, dlewin555 <dlew...@gmail.com <javascript:> > > wrote: > >> a silly question but this may happends anyway : >> >> did you checked that your board is plugged into the correct side ? >> >> Le mardi 7 janvier 2014 20:17:06 UTC+1, Terry Storm a écrit : >>> >>> That might be the problem then. >>> The 4DCAPE-70T is based on the LCD7 A3, and the LCD7 A3 support on >>> Angstrom only came out in August 2013 I believe. >>> So reflash using the latest image and it should work, albeit the touch >>> related issues which are discussed elsewhere. >>> You could try the latest test release: http://downloads. >>> angstrom-distribution.org/demo/beaglebone/testing/BBB- >>> eMMC-flasher-v2013.06-2014.01.03.img.xz >>> >>> Else flash Android which is linked in the Datasheet from 4D, which does >>> work correctly. >>> >>> >>> On 7 January 2014 22:37, William Hermans <yyr...@gmail.com> wrote: >>> >>>> Thats the version of angstrom the BBB shipped with back in June last >>>> year ( e.g. when it first started shipping to the general public ). AKA, >>>> ancient. >>>> >>>> >>>> On Tue, Jan 7, 2014 at 12:11 AM, Terry Storm <terrys...@gmail.com>wrote: >>>> >>>>> Hi Brian >>>>> >>>>> Sorry I don't know what that is. What distribution is that? >>>>> >>>>> Have you tried Android or Angstrom to verify the CAPE works correctly >>>>> first? >>>>> >>>>> Terry >>>>> >>>>> >>>>> On 7 January 2014 18:38, Brian Yee <brian...@gmail.com> wrote: >>>>> >>>>>> Terry, I am running version: Linux beaglebone 3.8.6 #1 SMP Sat Apr >>>>>> 13 09:10:52 CEST 2013 armv7l GNU/Linux >>>>>> >>>>>> >>>>>> Brian >>>>>> >>>>>> >>>>>> On Thursday, January 2, 2014 9:19:26 AM UTC-8, Brian Yee wrote: >>>>>>> >>>>>>> A couple of weeks ago I installed a 4D Systems 4DCAPE-70T on my BBB >>>>>>> board and powered it up. >>>>>>> I was able to connect via USB but there was no display on the LCD >>>>>>> cape. I also tried to run it standalone >>>>>>> with a USB mouse and keyboard (no HDMI display attached) but still >>>>>>> no display. >>>>>>> >>>>>>> Has anyone else had luck with this, and what hardware/OS >>>>>>> configuration did you use? Any known >>>>>>> problems or hints? >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Brian >>>>>>> >>>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "BeagleBoard" group. >>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> beagleboard...@googlegroups.com. >>>>>> >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to beagleboard...@googlegroups.com. >>>>> >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> beagleboard...@googlegroups.com. >>>> >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/_fkiZcnCl2I/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.