Yes mine work fine I have a LCD4, LCD7, 4DCAPE-43T and 4DCAPE-70T
What other 4D LCD shields do you have which dont work? Terry On Thursday, 9 January 2014 10:54:14 UTC+13, Brian Yee wrote: > > Terry, > > Yes, the user light is on solid. The curious thing is that this behaviour > is the same for a couple of > other BeagleBoards and 4D LCD shields. I don't think it is the hardware, > unless there is some > sort of design problem. Have you gotten one to work? > > Thanks, > > Brian > > > > On Wed, Jan 8, 2014 at 12:03 PM, Terry Storm <terrys...@gmail.com<javascript:> > > wrote: > >> Is the USER LED flashing for you, or on solid? >> If its not flashing then I don't think the Cape has been identified by >> the BBB correctly. >> If you cant get it working, then you might have a dud one. Claim RMA and >> get it replaced. >> >> >> On Thursday, 9 January 2014 06:36:35 UTC+13, Brian Yee wrote: >> >>> >>> >>> Yes, I double checked the insertion of the board. Also, the LED's came >>> on and the reset and power switches worked ok. >>> I also flashed the latest image from the BeagleBoard.org site: >>> BBB-eMMC-flasher-2013.09.04.img.xz >>> with the same results. The images suggested earlier ( >>> BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz<http://downloads.angstrom-distribution.org/demo/beaglebone/testing/BBB-eMMC-flasher-v2013.06-2014.01.03.img.xz>) >>> >>> had some errors >>> when I tried to unpack them with 7-Zip. >>> >>> I may try ordering a cape from another vendor (Circuitco) and see if >>> that has the same problem. I am presuming it >>> uses the same driver. >>> >>> TIA for the dialog on this from everyone. >>> >>> Brian >>> >>> >>> >>> On Wed, Jan 8, 2014 at 9:12 AM, dlewin555 <dlew...@gmail.com> wrote: >>> >>>> a silly question but this may happends anyway : >>>> >>>> did you checked that your board is plugged into the correct side ? >>>> >>>> Le mardi 7 janvier 2014 20:17:06 UTC+1, Terry Storm a écrit : >>>>> >>>>> That might be the problem then. >>>>> The 4DCAPE-70T is based on the LCD7 A3, and the LCD7 A3 support on >>>>> Angstrom only came out in August 2013 I believe. >>>>> So reflash using the latest image and it should work, albeit the touch >>>>> related issues which are discussed elsewhere. >>>>> You could try the latest test release: http://downloads.angs >>>>> trom-distribution.org/demo/beaglebone/testing/BBB-eMMC- >>>>> flasher-v2013.06-2014.01.03.img.xz >>>>> >>>>> Else flash Android which is linked in the Datasheet from 4D, which >>>>> does work correctly. >>>>> >>>>> >>>>> On 7 January 2014 22:37, William Hermans <yyr...@gmail.com> wrote: >>>>> >>>>>> Thats the version of angstrom the BBB shipped with back in June last >>>>>> year ( e.g. when it first started shipping to the general public ). AKA, >>>>>> ancient. >>>>>> >>>>>> >>>>>> On Tue, Jan 7, 2014 at 12:11 AM, Terry Storm <terrys...@gmail.com>wrote: >>>>>> >>>>>>> Hi Brian >>>>>>> >>>>>>> Sorry I don't know what that is. What distribution is that? >>>>>>> >>>>>>> Have you tried Android or Angstrom to verify the CAPE works >>>>>>> correctly first? >>>>>>> >>>>>>> Terry >>>>>>> >>>>>>> >>>>>>> On 7 January 2014 18:38, Brian Yee <brian...@gmail.com> wrote: >>>>>>> >>>>>>>> Terry, I am running version: Linux beaglebone 3.8.6 #1 SMP Sat Apr >>>>>>>> 13 09:10:52 CEST 2013 armv7l GNU/Linux >>>>>>>> >>>>>>>> >>>>>>>> Brian >>>>>>>> >>>>>>>> >>>>>>>> On Thursday, January 2, 2014 9:19:26 AM UTC-8, Brian Yee wrote: >>>>>>>>> >>>>>>>>> A couple of weeks ago I installed a 4D Systems 4DCAPE-70T on my >>>>>>>>> BBB board and powered it up. >>>>>>>>> I was able to connect via USB but there was no display on the LCD >>>>>>>>> cape. I also tried to run it standalone >>>>>>>>> with a USB mouse and keyboard (no HDMI display attached) but still >>>>>>>>> no display. >>>>>>>>> >>>>>>>>> Has anyone else had luck with this, and what hardware/OS >>>>>>>>> configuration did you use? Any known >>>>>>>>> problems or hints? >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> >>>>>>>>> Brian >>>>>>>>> >>>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>> the Google Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>>>>>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>> to beagleboard...@googlegroups.com. >>>>>>>> >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to beagleboard...@googlegroups.com. >>>>>>> >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "BeagleBoard" group. >>>>>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>>>>> pic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> beagleboard...@googlegroups.com. >>>>>> >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>> >>>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit https://groups.google.com/d/ >>>> topic/beagleboard/_fkiZcnCl2I/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> beagleboard...@googlegroups.com. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/_fkiZcnCl2I/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.