Does anyone know of a JTAG adapter for the BBB that will connect to the IAR/Segger iJet?
The Samtec FTR-110-03-G-D-06 does not have the correct spacing or pin-out. The two rows have the correct pin-to-pin spacing but the two rows are too far apart (.05inX.05in pitch) The IAR interface has the following pinout: 1 VTref 2 SWDIO/TMS 3 GND 4 SWCLK/TCK 5 GND 6 SWO/TDO 7 N/C 8 TDI 9 GNC 10 nRESET 11 TgtPwr 12 N/C 13 TgtPwr 14 N/C 15 GND 16 N/C 17 GND 18 N/C 19 GND 20 N/C Thanks in advance for any help!!! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.