From: <gkil...@gmail.com> Reply-To: <beagleboard@googlegroups.com> Date: Friday, March 21, 2014 at 2:46 AM To: <beagleboard@googlegroups.com> Subject: [beagleboard] Re: BBB JTAG for iJet (IAR/Segger)
> > Thanks John., but that doesn't have the correct pin-out and is too big Sorry about that, I should have paid more attention to the pinout. FTR-110-03-G-D-06 is the correct part number for the BBB as I have these mounted on my BBB. I don¹t understand why every JTAG vendor has to have a different pin layout. I have several JTAG emulators and each requires an adapter for BBB. I¹m not aware of any adapter that will match the IAR JTAG to the BBB JTAG. You may have to make your own. If you know how to design a PCB, you could use these guys to make a PCB for $29: http://www.protoexpress.com/content/noTouch.jsp What software are you planning to use with the IAR emulator? Regards, John > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.