I would make sure you flash it correctly per the instructions and run it from the DC jack.
Depending on what you have plugged in and how good the USB power source is, it may not power the board. Gerald On Wed, Mar 26, 2014 at 10:40 AM, Jones Jebaraj < jonesjosephjeba...@gmail.com> wrote: > Hi all > I am a newbie to beagle bone black. My BBB is not booting. When powerd > with the barrel connector, only the power led is glowing.Any of the USR > leds does not glow. Tried to reflash the eMMC, but no change. Also the > board does not power up with the usb cable. Any suggestions?? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.