Thank you Gearald, for you timely reply.I am using a 5V Power bank to power the board. But I think that the power supply may not be the problem because the same does occur when I connect it via my laptop. Also I forgot to mention that the board heats up unusually. It is worthwhile to mention that I have another BBB which works on the same power bank without issues.
On Wednesday, March 26, 2014 9:14:17 PM UTC+5:30, Gerald wrote: > > I would make sure you flash it correctly per the instructions and run it > from the DC jack. > > Depending on what you have plugged in and how good the USB power source > is, it may not power the board. > > Gerald > > > > On Wed, Mar 26, 2014 at 10:40 AM, Jones Jebaraj > <jonesjose...@gmail.com<javascript:> > > wrote: > >> Hi all >> I am a newbie to beagle bone black. My BBB is not booting. When powerd >> with the barrel connector, only the power led is glowing.Any of the USR >> leds does not glow. Tried to reflash the eMMC, but no change. Also the >> board does not power up with the usb cable. Any suggestions?? >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
