On Thursday, May 1, 2014 8:35:55 AM UTC-6, Gerald wrote: > > I have no plans to make any changes to the board. Only change for Rev C > was to populate the 4G eMMC. The idea of scrapping 80,000 is definitely a > cost issue. > > I would never suggest scrapping that many boards. If you already have boards then by all means use them.
I was suggesting a change before your next order. When you are ordering PCBs in 100K quantities, the NRE charges for a PCB revision get spread pretty thin. > The requirement for the BBB was to be compatible with the BeagleBone. > > If you add optional features to the BBB it is still compatible with the Beaglebone. The software would have to be changed to activate the RTS/CTS handshaking if this new feature is desired. Otherwise these lines would still effectively be ignored and operate just as they do now, where they are not connected. Dennis Cote -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.