Hi,
I'm currently working on a custom BeagleBone Black of ours and I have a few problem. The electronic is the same except that there is no graphic chip and no EEPROM. I'm booting on a µSD card the Angstrom distribution used in the BBB. The board is working well except that I have the following message during the boot "[ 5.561536] bone-capemgr bone_capemgr.9: Failed to scan baseboard eeprom". This is perfectly normal because I have no EEPROM. My problem is that I didn't know that the EEPROM was mandatory to initialize the cape manager. Thus, my EMMC is not loaded by the OS. I already tried to enable the cape with the uEnv.txt but it did nothing. I also tried to load it manually but in my cape manager folder there is no "slot" file so i guess that the cape manager is simply OFF. Is there a way to bypass the EEPROM and to load by default the EMMC cape ? I'm actually going through the kernel compilation, i'm afraid that I can't avoid it. Does someone have any experience on this ? Thank you by advance, Julien -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
