On Sat, Aug 16, 2014 at 2:50 PM, mtn_beagle <djricha...@axeoninvestments.com > wrote:
> Jason, >> >> > The Bone 101 page has updated to reflect Rev C and 4 GB. > > From this paragraph on the 101 page: See updates > <http://beagleboard.github.io/Support/BoneScript/updates/> for the > step-by-step guide. > The link to update images from the revised page > http://beagleboard.github.io/Support/BoneScript/updates/ > results in a page not found error. > > Also, the paragraph below that still points to the Beagleboard/Angstrom > page. There is no explanation of the earlier boards shipping with Angstrom > nor the Rev C boards shipping with Debian and a link to an updates page. > Can you propose specific language? I'd really expected folks to feel encouraged to send pull requests to update content. > > One question regarding links from this page. When a new user connects to > the board via USB, unless a wifi module has been magically installed, or, > instead, the connection is over ethernet through a router, without internet > connection sharing enabled on the PC, will the links not fail? > If your board is plugged in via USB to the same computer or Ethernet on the same LAN (and your computer supports mDNS), the page should auto-discover the board. Otherwise, you can also type in the IP address of your board. > Regards, > David > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
