On Wed, Aug 27, 2014 at 8:59 PM, Dallas Clement <dallas.a.clem...@gmail.com> wrote: > Hi Robert, everything builds clean and I can see SPI0 after booting. The > devices are spi1.0 and spi1.1. However, I'm not able to see any SPI1 > devices. Suspecting HDMI conflict, I set the status for the HDMI device to > "disabled" in > am335x-base0033.dts. But that didn't seem to help. Anything else you can > think of that I should check?
Okay, i should probally remove all non "bb.org" boards.. am335x-base0033.dts am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION The only two you should touch: am335x-bone.dts (BeagleBone White) am335x-boneblack.dts (BeagleBone Black) If you want to pastebin.com your current *.dts I'll look at it.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.