Well it just ran for about 15 minutes and rebooted using USB power, so I'm going to reflash eMMC with original distro and try that then return if it reboots again. Will get a BBB from Adafruit although the vendor has offered to send another element14 replacement.
On Thursday, September 4, 2014 12:59:41 PM UTC-4, Greg Kelley wrote: > > BBB ran for 6 hours and just rebooted at 12:30pm so I now have it powered > through the USB port with a 5v1a power supply instead of through the main > power plug. If this reboots my last attempt will be to downgrade back to > 3.8 and if it still reboots I'll have to send it back. It's an element14 > purchased from an online vendor. > > On Thursday, September 4, 2014 7:04:52 AM UTC-4, Greg Kelley wrote: >> >> Thanks for the suggestion, if I get reboots with 3.14.17 I'll try the usb >> power and if that doesn't work I'll go back to 3.8 although I had USB hot >> plug issues with that version. >> >> On Thursday, September 4, 2014 6:49:16 AM UTC-4, lisarden wrote: >>> >>> power the board by USB, remove the wall adapter and test again. This >>> issue was described long ago but there was the kernel 3.2. The issue >>> disappeared with the 3.8 >>> >>> >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
