And ground on J1 of course is denoted by the white dot on the board. On Thu, Sep 18, 2014 at 2:55 AM, William Hermans <yyrk...@gmail.com> wrote:
> Make sure hardware control flow are set to "none" in both puTTY and device > manager for the COM port. Then make sure if using a serial debug cable as > you seem to be saying you are. That TX on cable is connected to RX on J1, > and RX on cable is connected to TX on J1.NO idea what your experience > level is here so I'll just mention that. > > On Thu, Sep 18, 2014 at 12:49 AM, leo mayer <leo.ze...@gmail.com> wrote: > >> I get none of them. I tried as well reinstall the Win drivers, as well as >> Putty-access. Nope, doesn't work. I would say its the image which hangs, >> but no idea where and what. >> >> Other ideas? >> >> Is it possible to flash the existing image? I posted my attempt at the >> very beginning but somehow this failed. Ideas for this part? >> >> >>> You "should" either get random text from something booting or a stream >>> of "CCCCC's" >>> >>> If you get neither, either the serial is plugged in wrong, terra term >>> doesn't have the correct port. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> http://www.rcn-ee.com/ >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
