Hi all, First post here. Is anyone having issues flashing the latest Debian image, 2015-03-01, on the Beaglebone Black? I've tried it maybe a dozen times now with both a 5V and USB power supplies. I have flashed other images on my BBB just fine before, and swear I am following the same procedure. I am: 1. Inserting the microSD with the image, 2. Holding down the boot switch 3. Applying power 4. Waiting for the user LEDs to all turn on then start to flash 5. Release the boot switch.
The LED activity looks active for only a couple minutes then it switches to the regular heartbeat pattern, and it never goes to all 4 on again and shut down like when flashing other images even if I wait hours. I have found that all its doing is booting from the microSD card. If I don't power down after the flash attempt, keep the microSD installed, and check version, it indicates I'm running version 2015-03-01. If I power down, remove the card, then power back up, the old image is running. Did something change with the flashing procedure? I'm guessing there is something I have to fiddle with on the image to make this work. I'm comfortable writing code in C, C++, C#, and Java, but I'm a newbie when it comes to Linux. Any help would be much appreciated. Tom -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.